Massey Ferguson MF 6480 A or Massey Ferguson MF 8120 A?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the MF 6480 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 8120 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Massey Ferguson 6480A suits loader and hydraulic implement work better on this data: 93% (49.7 L/min / 13.1 gpm) more hydraulic flow.
  • The Massey Ferguson 8120A suits road haulage better on this data: 24% (2,250 kg / 4,960 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Massey Ferguson MF 6480 A and Massey Ferguson MF 8120 A, with the call on each
QuestionMF 6480 AMF 8120 ACall
Which puts more power through the PTO shaft?106.7 kW (143.1 hp)Traktorenlexikon, “Massey Ferguson MF 6480”106.7 kW (143.1 hp)Traktorenlexikon, “Massey Ferguson MF 8120”Not comparableNot comparable on power at the PTO shaft: the MF 6480 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 8120 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 6480 A and the MF 8120 A.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the MF 6480 A and the MF 8120 A.
Which pumps more oil for implements?103.0 L/min (27.2 gpm)Traktorenlexikon, “Massey Ferguson MF 6480”53.3 L/min (14.1 gpm)Traktorenlexikon, “Massey Ferguson MF 8120”AheadThe Massey Ferguson 6480A has 93% more hydraulic flow (49.7 L/min / 13.1 gpm) than the Massey Ferguson 8120A (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?5,010 kg (11,045 lb)Traktorenlexikon, “Massey Ferguson MF 6480”5,640 kg (12,434 lb)Traktorenlexikon, “Massey Ferguson MF 8120”Not comparableNot comparable on three-point lift: the MF 6480 A: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 6480”); the MF 8120 A: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 8120”) — not the same quantity, basis and condition.
Which is heavier, for traction?5,240 kg (11,552 lb)Traktorenlexikon, “Massey Ferguson MF 6480”5,640 kg (12,434 lb)Traktorenlexikon, “Massey Ferguson MF 8120”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?9,250 kg (20,393 lb)Traktorenlexikon, “Massey Ferguson MF 6480”11,500 kg (25,353 lb)Traktorenlexikon, “Massey Ferguson MF 8120”AheadThe Massey Ferguson 8120A has 24% higher maximum permissible mass (2,250 kg / 4,960 lb) than the Massey Ferguson 6480A (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?24 to 32Traktorenlexikon, “Massey Ferguson MF 6480”32Traktorenlexikon, “Massey Ferguson MF 8120”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the MF 6480 A and the MF 8120 A.
Which is faster on the road?40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Massey Ferguson MF 6480”40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 8120”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?—540/540E/1000 rpmTraktorenlexikon, “Massey Ferguson MF 8120”No figureNo call on PTO speeds: no standard PTO speed stated for the MF 6480 A.
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Massey Ferguson MF 6480”independentTraktorenlexikon, “Massey Ferguson MF 8120”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 6480”Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 8120”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2003–20121995–1999Ahead (a fact, not an advantage)The Massey Ferguson 6480A is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson 6480A has 93% more hydraulic flow (49.7 L/min / 13.1 gpm) than the Massey Ferguson 8120A (both pump flow, as stated by the source).
  • The Massey Ferguson 8120A has 24% higher maximum permissible mass (2,250 kg / 4,960 lb) than the Massey Ferguson 6480A (both maximum permissible mass, as stated by the source).
  • The Massey Ferguson 6480A is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the MF 6480 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 8120 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the MF 6480 A: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 6480”); the MF 8120 A: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 8120”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO speeds.

← Every figure for both machines, side by side, with sources