Massey Ferguson MF 6260 (A) or New Holland TM 115 (Traktorenlexikon)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the MF 6260 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM 115 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The New Holland TM 115 suits loader and hydraulic implement work better on this data: 24% (22.6 L/min / 6.0 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Massey Ferguson MF 6260 (A) and New Holland TM 115 (Traktorenlexikon), with the call on each
QuestionMF 6260 (A)TM 115Call
Which puts more power through the PTO shaft?77.3 kW (103.7 hp)Traktorenlexikon, “Massey Ferguson MF 6260”77.2 kW (103.5 hp)Traktorenlexikon, “New Holland TM115”Not comparableNot comparable on power at the PTO shaft: the MF 6260 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM 115 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 6260 (A) and the TM 115.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the MF 6260 (A) and the TM 115.
Which pumps more oil for implements?95.7 L/min (25.3 gpm)Traktorenlexikon, “Massey Ferguson MF 6260”118.3 L/min (31.3 gpm)Traktorenlexikon, “New Holland TM115”AheadThe New Holland TM 115 has 24% more hydraulic flow (22.6 L/min / 6.0 gpm) than the Massey Ferguson MF 6260 (A) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?6,500 kg (14,330 lb)Traktorenlexikon, “Massey Ferguson MF 6260”6,560 kg (14,462 lb)Traktorenlexikon, “New Holland TM115”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?4,515 kg (9,954 lb)Traktorenlexikon, “Massey Ferguson MF 6260”5,334 kg (11,759 lb)Traktorenlexikon, “New Holland TM115”Ahead (a fact, not an advantage)The New Holland TM 115 is 18% heavier (819 kg / 1,806 lb) than the Massey Ferguson MF 6260 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?8,800 kg (19,401 lb)Traktorenlexikon, “Massey Ferguson MF 6260”8,500 kg (18,739 lb)Traktorenlexikon, “New Holland TM115”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?16 to 32Traktorenlexikon, “Massey Ferguson MF 6260”18 to 24Traktorenlexikon, “New Holland TM115”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the MF 6260 (A) and the TM 115.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 6260”40 km/h (24.9 mph)Traktorenlexikon, “New Holland TM115”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540/1000/540E/1000E rpmTraktorenlexikon, “Massey Ferguson MF 6260”540/540E/1000 rpmTraktorenlexikon, “New Holland TM115”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “New Holland TM115”No figureNo call on PTO independence: not stated for the MF 6260 (A).
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 6260”4WDTraktorenlexikon, “New Holland TM115”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1999–20031999–2002EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The New Holland TM 115 has 24% more hydraulic flow (22.6 L/min / 6.0 gpm) than the Massey Ferguson MF 6260 (A) (both pump flow, as stated by the source).
  • The New Holland TM 115 is 18% heavier (819 kg / 1,806 lb) than the Massey Ferguson MF 6260 (A) (both unladen weight, as stated by the source).
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the MF 6260 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM 115 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources