Massey Ferguson MF 6245 (A) or Renault Ceres 340 (A)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the MF 6245 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Ceres 340 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Renault Ceres 340 (A) suits loader and hydraulic implement work better on this data: 23% (960 kg / 2,116 lb) more three-point lift.
  • The Massey Ferguson 6245 (A) suits road haulage better on this data: 53% (3,065 kg / 6,757 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Massey Ferguson MF 6245 (A) and Renault Ceres 340 (A), with the call on each
QuestionMF 6245 (A)Ceres 340 (A)Call
Which puts more power through the PTO shaft?62.6 kW (83.9 hp)Traktorenlexikon, “Massey Ferguson MF 6245”62.6 kW (83.9 hp)Traktorenlexikon, “Renault Ceres 340”Not comparableNot comparable on power at the PTO shaft: the MF 6245 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Ceres 340 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 6245 (A) and the Ceres 340 (A).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the MF 6245 (A) and the Ceres 340 (A).
Which pumps more oil for implements?84.7 L/min (22.4 gpm)Traktorenlexikon, “Massey Ferguson MF 6245”—No figureNo call on hydraulic flow: no figure on record for the Ceres 340 (A).
Which lifts more on the three-point hitch?4,250 kg (9,370 lb)Traktorenlexikon, “Massey Ferguson MF 6245”5,210 kg (11,486 lb)Traktorenlexikon, “Renault Ceres 340”AheadThe Renault Ceres 340 (A) has 23% more lift (960 kg / 2,116 lb) than the Massey Ferguson 6245 (A) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,920 kg (8,642 lb)Traktorenlexikon, “Massey Ferguson MF 6245”3,535 kg (7,793 lb)Traktorenlexikon, “Renault Ceres 340”Ahead (a fact, not an advantage)The Massey Ferguson 6245 (A) is 11% heavier (385 kg / 849 lb) than the Renault Ceres 340 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?8,800 kg (19,401 lb)Traktorenlexikon, “Massey Ferguson MF 6245”5,735 kg (12,644 lb)Traktorenlexikon, “Renault Ceres 340”AheadThe Massey Ferguson 6245 (A) has 53% higher maximum permissible mass (3,065 kg / 6,757 lb) than the Renault Ceres 340 (A) (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?16 to 32Traktorenlexikon, “Massey Ferguson MF 6245”18 to 20Traktorenlexikon, “Renault Ceres 340”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the MF 6245 (A) and the Ceres 340 (A).
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 6245”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Renault Ceres 340”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000/540E/1000E rpmTraktorenlexikon, “Massey Ferguson MF 6245”540/1000 rpmTraktorenlexikon, “Renault Ceres 340”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Massey Ferguson MF 6245”independentTraktorenlexikon, “Renault Ceres 340”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 6245”Two-wheel or four-wheel driveTraktorenlexikon, “Renault Ceres 340”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1999–20031998–2001EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Renault Ceres 340 (A) has 23% more lift (960 kg / 2,116 lb) than the Massey Ferguson 6245 (A) (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson 6245 (A) is 11% heavier (385 kg / 849 lb) than the Renault Ceres 340 (A) (both unladen weight, as stated by the source).
  • The Massey Ferguson 6245 (A) has 53% higher maximum permissible mass (3,065 kg / 6,757 lb) than the Renault Ceres 340 (A) (both maximum permissible mass, as stated by the source).
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the MF 6245 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Ceres 340 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow and a creeper range.

← Every figure for both machines, side by side, with sources