8 material differences · fewer than 12
Tractor oneMassey Ferguson MF 6245 (A)1999–2003No measured PTO figureTractor twoNew Holland T4.75from 2011No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (40%); they were not built in overlapping years (1999–2003; 2011–2011). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
8 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | MF 6245 (A) | T4.75 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 83.9 hp | 84 hp | — |
| Engine declared | Perkins 1004.40 T | — | — |
| Displacement declared | 3.99 L | — | — |
| Maximum torque declared | 230 lb·ft · 312 N·m | 206 lb·ft · 279.4 N·m | +12% MF 6245 (A) |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 24.9 mph · 40 km/h | — |
| Clutch declared | Pedal-operated hydraulic VALEO multi-plate clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 22.4 gpm · 84.7 L/min | 12.5 gpm · 47.5 L/min | +78% MF 6245 (A) |
| Pressure declared | 3,336 psi · 230 bar | — | — |
| Rear PTO speeds declared | 540/1000/540E/1000E rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,642 lb · 3,920 kg | 6,173 lb · 2,800 kg | +40% MF 6245 (A) |
| Maximum permissible mass declared | 19,401 lb · 8,800 kg | 10,582 lb · 4,800 kg | +83% MF 6245 (A) |
| Wheelbase declared | 97.8 in · 2,485 mm | — | — |
| Length declared | 162.8 in · 4,134 mm | 149.3 in · 3,792 mm | +9% MF 6245 (A) |
| Width declared | 75.7–86.3 in · 1,922–2,193 mm | 76.8 in · 1,950 mm | differs |
| Ground clearance declared | 16.9 in · 430 mm | 15.0 in · 380 mm | +13% MF 6245 (A) |
| Turning radius, braked declared | — | 12.0 ft · 3.66 m | — |
| Fuel tank declared | 137.4 qt · 130.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 6245 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 6245”
New Holland T4.75 sources
- Source: Traktorenlexikon, “New Holland T4.75”
- Source: OECD test report 2743, 2013
- Source: OECD test report 2887, 2015
- Source: OECD test report 2887, 2015