Massey Ferguson MF 6235 (A) vs VALMET 6200-4

11 material differences · fewer than 12

Tractor one

1999–2003

No measured PTO figure

Tractor two

1996–2007

No measured PTO figure

Which should you choose?

Read our verdict on the MF 6235 (A) and the 6200-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 6235 (A) and VALMET 6200-4, field by field
Field	MF 6235 (A)	6200-4	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	Perkins 1004.4 T	VALMET 420 DSRE (44 DT)	differs
Displacement declared	3.99 L	4.40 L	+10% 6200-4
Maximum torque declared	213 lb·ft · 289 N·m	—	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated hydraulic VALEO multi-plate clutch	—	—
Hydraulics & hitch
Pump flow declared	—	21.2 gpm · 80.3 L/min	—
Pressure declared	3,336 psi · 230 bar	—	—
Three-point lift at ends declared	9,370 lb · 4,250 kg	9,601 lb · 4,355 kg	—
Rear PTO speeds declared	540/1000/540E/1000E rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,422 lb · 3,820 kg	8,929–9,193 lb · 4,050–4,170 kg	differs
Maximum permissible mass declared	17,637 lb · 8,000 kg	14,330 lb · 6,500 kg	+23% MF 6235 (A)
Wheelbase declared	97.8 in · 2,485 mm	91.6 in · 2,327 mm	+7% MF 6235 (A)
Length declared	162.8 in · 4,134 mm	177.7 in · 4,514 mm	+9% 6200-4
Width declared	75.7 in · 1,922 mm	85.9 in · 2,181 mm	+13% 6200-4
Height declared	104.4 in · 2,651 mm	106.3 in · 2,700 mm	—
Ground clearance declared	15.0 in · 380 mm	16.9 in · 430 mm	+13% 6200-4
Turning radius, braked declared	—	15.3 ft · 4.65 m	—
Fuel tank declared	137.4 qt · 130.0 L	167.0 qt · 158.0 L	+22% 6200-4

Source

Source