Massey Ferguson MF 6140 (A) vs VALMET 6350 HiTech

11 material differences · fewer than 12

Tractor one

1995–1999

No measured PTO figure

Tractor two

1999–2006

No measured PTO figure

Which should you choose?

Read our verdict on the MF 6140 (A) and the 6350 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 6140 (A) and VALMET 6350 HiTech, field by field
Field	MF 6140 (A)	6350 HiTech	Gap
Engine
Engine power, claimed claimed	88.8 hp	88.8 hp	—
Engine declared	Perkins 1004.4 T2	VALMET 420 DSRE or 44.311 DT	differs
Displacement declared	3.99 L	4.40 L	+10% 6350 HiTech
Maximum torque declared	249 lb·ft · 338 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Mechanically operated dry Valeo single-plate clutch	—	—
Hydraulics & hitch
Pump flow declared	13.6 gpm · 51.5 L/min	18.5 gpm · 70.0 L/min	+36% 6350 HiTech
Pressure declared	2,727 psi · 188 bar	2,901 psi · 200 bar	+6% 6350 HiTech
Three-point lift at ends declared	7,688 lb · 3,487 kg	12,346 lb · 5,600 kg	+61% 6350 HiTech
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,069 lb · 3,660 kg	10,516 lb · 4,770 kg	+30% 6350 HiTech
Maximum permissible mass declared	—	19,842 lb · 9,000 kg	—
Wheelbase declared	93.3 in · 2,371 mm	91.6 in · 2,326 mm	—
Length declared	158.2 in · 4,019 mm	180.5 in · 4,585 mm	+14% 6350 HiTech
Width declared	72.8 in · 1,850 mm	92.3 in · 2,345 mm	+27% 6350 HiTech
Height declared	104.5 in · 2,654 mm	110.2 in · 2,800 mm	+6% 6350 HiTech
Ground clearance declared	14.1 in · 357 mm	17.1 in · 434 mm	+22% 6350 HiTech
Turning radius, braked declared	—	15.3 ft · 4.65 m	—
Fuel tank declared	137.4 qt · 130.0 L	174.4 qt · 165.0 L	+27% 6350 HiTech

Source

Source