Massey Ferguson MF 5470 (A) or New Holland T 6050 Delta?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the MF 5470 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 6050 Delta has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Massey Ferguson 5470 (A) suits loader and hydraulic implement work better on this data: 53% (34.2 L/min / 9.0 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | MF 5470 (A) | T 6050 Delta | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 92 kW (123 hp)Traktorenlexikon, “Massey Ferguson MF 5470” | 92.7 kW (124.3 hp)Traktorenlexikon, “New Holland T 6050 Delta” | Not comparableNot comparable on power at the PTO shaft: the MF 5470 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 6050 Delta has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 5470 (A) and the T 6050 Delta. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the MF 5470 (A) and the T 6050 Delta. |
| Which pumps more oil for implements? | 99.0 L/min (26.2 gpm)Traktorenlexikon, “Massey Ferguson MF 5470” | 64.8 L/min (17.1 gpm)Traktorenlexikon, “New Holland T 6050 Delta” | AheadThe Massey Ferguson 5470 (A) has 53% more hydraulic flow (34.2 L/min / 9.0 gpm) than the New Holland T 6050 Delta (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | — | 5,997 kg (13,221 lb)Traktorenlexikon, “New Holland T 6050 Delta” | No figureNo call on three-point lift: no figure on record for the MF 5470 (A). |
| Which is heavier, for traction? | 4,420 kg (9,744 lb)Traktorenlexikon, “Massey Ferguson MF 5470” | 5,230 kg (11,530 lb)Traktorenlexikon, “New Holland T 6050 Delta” | Ahead (a fact, not an advantage)The New Holland T 6050 Delta is 18% heavier (810 kg / 1,786 lb) than the Massey Ferguson 5470 (A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 8,400 kg (18,519 lb)Traktorenlexikon, “Massey Ferguson MF 5470” | 9,000 kg (19,842 lb)Traktorenlexikon, “New Holland T 6050 Delta” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | 16Traktorenlexikon, “Massey Ferguson MF 5470” | 12 to 24Traktorenlexikon, “New Holland T 6050 Delta” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the MF 5470 (A) and the T 6050 Delta. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 5470” | 40 km/h (24.9 mph)Traktorenlexikon, “New Holland T 6050 Delta” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Massey Ferguson MF 5470” | 540/540E/1000 rpmTraktorenlexikon, “New Holland T 6050 Delta” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the MF 5470 (A) and the T 6050 Delta. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 5470” | 4WDTraktorenlexikon, “New Holland T 6050 Delta” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2006–2012 | 2007–2012 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Massey Ferguson 5470 (A) has 53% more hydraulic flow (34.2 L/min / 9.0 gpm) than the New Holland T 6050 Delta (both pump flow, as stated by the source).
- The New Holland T 6050 Delta is 18% heavier (810 kg / 1,786 lb) than the Massey Ferguson 5470 (A) (both unladen weight, as stated by the source).
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the MF 5470 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 6050 Delta has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources