Massey Ferguson MF 5450 A or New Holland TM 115 (Traktorenlexikon)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the MF 5450 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM 115 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The New Holland TM 115 suits loader and hydraulic implement work better on this data: 53% (2,260 kg / 4,982 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Massey Ferguson MF 5450 A and New Holland TM 115 (Traktorenlexikon), with the call on each
QuestionMF 5450 ATM 115Call
Which puts more power through the PTO shaft?77.3 kW (103.7 hp)Traktorenlexikon, “Massey Ferguson MF 5450”77.2 kW (103.5 hp)Traktorenlexikon, “New Holland TM115”Not comparableNot comparable on power at the PTO shaft: the MF 5450 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM 115 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 5450 A and the TM 115.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the MF 5450 A and the TM 115.
Which pumps more oil for implements?118.3 L/min (31.3 gpm)Traktorenlexikon, “New Holland TM115”No figureNo call on hydraulic flow: no figure on record for the MF 5450 A.
Which lifts more on the three-point hitch?4,300 kg (9,480 lb)Traktorenlexikon, “Massey Ferguson MF 5450”6,560 kg (14,462 lb)Traktorenlexikon, “New Holland TM115”AheadThe New Holland TM 115 has 53% more lift (2,260 kg / 4,982 lb) than the Massey Ferguson MF 5450 A (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,900 kg (8,598 lb)Traktorenlexikon, “Massey Ferguson MF 5450”5,334 kg (11,759 lb)Traktorenlexikon, “New Holland TM115”Ahead (a fact, not an advantage)The New Holland TM 115 is 37% heavier (1,434 kg / 3,161 lb) than the Massey Ferguson MF 5450 A (both unladen weight, as stated by the source).
Which may carry more ballast and load?8,500 kg (18,739 lb)Traktorenlexikon, “Massey Ferguson MF 5450”8,500 kg (18,739 lb)Traktorenlexikon, “New Holland TM115”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?16Traktorenlexikon, “Massey Ferguson MF 5450”18 to 24Traktorenlexikon, “New Holland TM115”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the MF 5450 A and the TM 115.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 5450”40 km/h (24.9 mph)Traktorenlexikon, “New Holland TM115”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Massey Ferguson MF 5450”540/540E/1000 rpmTraktorenlexikon, “New Holland TM115”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “New Holland TM115”No figureNo call on PTO independence: not stated for the MF 5450 A.
Which drives on both axles?4WDTraktorenlexikon, “Massey Ferguson MF 5450”4WDTraktorenlexikon, “New Holland TM115”; OECD test report 1917, 2000EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2011–20131999–2002Ahead (a fact, not an advantage)The Massey Ferguson MF 5450 A is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The New Holland TM 115 has 53% more lift (2,260 kg / 4,982 lb) than the Massey Ferguson MF 5450 A (both lift at the hitch ends, as stated by the source).
  • The New Holland TM 115 is 37% heavier (1,434 kg / 3,161 lb) than the Massey Ferguson MF 5450 A (both unladen weight, as stated by the source).
  • The Massey Ferguson MF 5450 A is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the MF 5450 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM 115 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources