Massey Ferguson MF 5450 A or New Holland T 5060?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the MF 5450 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 5060 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The New Holland T 5060 suits loader and hydraulic implement work better on this data: 33% (1,440 kg / 3,175 lb) more three-point lift.
- The Massey Ferguson 5450A suits road haulage better on this data: 25% (1,700 kg / 3,748 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | MF 5450 A | T 5060 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 77.3 kW (103.7 hp)Traktorenlexikon, “Massey Ferguson MF 5450” | 78 kW (105 hp)Traktorenlexikon, “New Holland T5060” | Not comparableNot comparable on power at the PTO shaft: the MF 5450 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 5060 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 5450 A and the T 5060. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the MF 5450 A and the T 5060. |
| Which pumps more oil for implements? | — | 67.1 L/min (17.7 gpm)Traktorenlexikon, “New Holland T5060” | No figureNo call on hydraulic flow: no figure on record for the MF 5450 A. |
| Which lifts more on the three-point hitch? | 4,300 kg (9,480 lb)Traktorenlexikon, “Massey Ferguson MF 5450” | 5,740 kg (12,655 lb)Traktorenlexikon, “New Holland T5060” | AheadThe New Holland T 5060 has 33% more lift (1,440 kg / 3,175 lb) than the Massey Ferguson 5450A (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 3,900 kg (8,598 lb)Traktorenlexikon, “Massey Ferguson MF 5450” | 3,835 kg (8,455 lb)Traktorenlexikon, “New Holland T5060” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 8,500 kg (18,739 lb)Traktorenlexikon, “Massey Ferguson MF 5450” | 6,800 kg (14,991 lb)Traktorenlexikon, “New Holland T5060” | AheadThe Massey Ferguson 5450A has 25% higher maximum permissible mass (1,700 kg / 3,748 lb) than the New Holland T 5060 (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 16Traktorenlexikon, “Massey Ferguson MF 5450” | 12 to 24Traktorenlexikon, “New Holland T5060” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the MF 5450 A and the T 5060. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 5450” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “New Holland T5060” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Massey Ferguson MF 5450” | 540/540E/1000 rpmTraktorenlexikon, “New Holland T5060” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “New Holland T5060” | No figureNo call on PTO independence: not stated for the MF 5450 A. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Massey Ferguson MF 5450” | Two-wheel or four-wheel driveTraktorenlexikon, “New Holland T5060” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2011–2013 | 2008–2012 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The New Holland T 5060 has 33% more lift (1,440 kg / 3,175 lb) than the Massey Ferguson 5450A (both lift at the hitch ends, as stated by the source).
- The Massey Ferguson 5450A has 25% higher maximum permissible mass (1,700 kg / 3,748 lb) than the New Holland T 5060 (both maximum permissible mass, as stated by the source).
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the MF 5450 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 5060 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources