Massey Ferguson MF 5445 (A) or VALMET 6350 HiTech?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the MF 5445 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6350 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The VALMET 6350 HiTech suits loader and hydraulic implement work better on this data: 15% (9.3 L/min / 2.5 gpm) more hydraulic flow and 17% (820 kg / 1,808 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | MF 5445 (A) | 6350 HiTech | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 66.2 kW (88.8 hp)Traktorenlexikon, “Massey Ferguson MF 5445” | 66.2 kW (88.8 hp)Traktorenlexikon, “Valmet 6350 HiTech” | Not comparableNot comparable on power at the PTO shaft: the MF 5445 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6350 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 5445 (A) and the 6350 HiTech. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the MF 5445 (A) and the 6350 HiTech. |
| Which pumps more oil for implements? | 60.7 L/min (16.0 gpm)Traktorenlexikon, “Massey Ferguson MF 5445” | 70.0 L/min (18.5 gpm)Traktorenlexikon, “Valmet 6350 HiTech” | AheadThe VALMET 6350 HiTech has 15% more hydraulic flow (9.3 L/min / 2.5 gpm) than the Massey Ferguson 5445 (A) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 4,780 kg (10,538 lb)Traktorenlexikon, “Massey Ferguson MF 5445” | 5,600 kg (12,346 lb)Traktorenlexikon, “Valmet 6350 HiTech” | AheadThe VALMET 6350 HiTech has 17% more lift (820 kg / 1,808 lb) than the Massey Ferguson 5445 (A) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 3,915 kg (8,631 lb)Traktorenlexikon, “Massey Ferguson MF 5445” | 4,770 kg (10,516 lb)Traktorenlexikon, “Valmet 6350 HiTech” | Ahead (a fact, not an advantage)The VALMET 6350 HiTech is 22% heavier (855 kg / 1,885 lb) than the Massey Ferguson 5445 (A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | 9,000 kg (19,842 lb)Traktorenlexikon, “Valmet 6350 HiTech” | No figureNo call on maximum permissible mass: no figure on record for the MF 5445 (A). |
| Which has the wider choice of gears? | 16Traktorenlexikon, “Massey Ferguson MF 5445” | 36Traktorenlexikon, “Valmet 6350 HiTech” | AheadThe VALMET 6350 HiTech has 125% more forward gears (20 gears) than the Massey Ferguson 5445 (A) (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the MF 5445 (A) and the 6350 HiTech. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 5445” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Valmet 6350 HiTech” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Massey Ferguson MF 5445” | 540/1000 rpmTraktorenlexikon, “Valmet 6350 HiTech” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Valmet 6350 HiTech” | No figureNo call on PTO independence: not stated for the MF 5445 (A). |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 5445” | 4WDTraktorenlexikon, “Valmet 6350 HiTech” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2003–2013 | 1999–2006 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The VALMET 6350 HiTech has 15% more hydraulic flow (9.3 L/min / 2.5 gpm) than the Massey Ferguson 5445 (A) (both pump flow, as stated by the source).
- The VALMET 6350 HiTech has 17% more lift (820 kg / 1,808 lb) than the Massey Ferguson 5445 (A) (both lift at the hitch ends, as stated by the source).
- The VALMET 6350 HiTech is 22% heavier (855 kg / 1,885 lb) than the Massey Ferguson 5445 (A) (both unladen weight, as stated by the source).
- The VALMET 6350 HiTech has 125% more forward gears (20 gears) than the Massey Ferguson 5445 (A) (both forward gears, as stated by the source).
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the MF 5445 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6350 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources