Massey Ferguson MF 5425 (A) or VALMET 6200-4?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the MF 5425 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6200-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Massey Ferguson MF 5425 (A) suits loader and hydraulic implement work better on this data: 17% (744 kg / 1,639 lb) more three-point lift.
  • The Massey Ferguson MF 5425 (A) suits road haulage better on this data: 16% (1,060 kg / 2,337 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Massey Ferguson MF 5425 (A) and VALMET 6200-4, with the call on each
QuestionMF 5425 (A)6200-4Call
Which puts more power through the PTO shaft?55.2 kW (74.0 hp)Traktorenlexikon, “Massey Ferguson MF 5425”55.2 kW (74.0 hp)Traktorenlexikon, “Valmet 6200”Not comparableNot comparable on power at the PTO shaft: the MF 5425 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6200-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 5425 (A) and the 6200-4.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the MF 5425 (A) and the 6200-4.
Which pumps more oil for implements?80.3 L/min (21.2 gpm)Traktorenlexikon, “Valmet 6200”No figureNo call on hydraulic flow: no figure on record for the MF 5425 (A).
Which lifts more on the three-point hitch?5,099 kg (11,240 lb)Traktorenlexikon, “Massey Ferguson MF 5425”4,355 kg (9,601 lb)Traktorenlexikon, “Valmet 6200”AheadThe Massey Ferguson MF 5425 (A) has 17% more lift (744 kg / 1,639 lb) than the VALMET 6200-4 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,945 kg (8,697 lb)Traktorenlexikon, “Massey Ferguson MF 5425”4,050 kg (8,929 lb) to 4,170 kg (9,193 lb)Traktorenlexikon, “Valmet 6200”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?7,560 kg (16,667 lb)Traktorenlexikon, “Massey Ferguson MF 5425”6,500 kg (14,330 lb)Traktorenlexikon, “Valmet 6200”AheadThe Massey Ferguson MF 5425 (A) has 16% higher maximum permissible mass (1,060 kg / 2,337 lb) than the VALMET 6200-4 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?16Traktorenlexikon, “Massey Ferguson MF 5425”12 to 36Traktorenlexikon, “Valmet 6200”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the MF 5425 (A) and the 6200-4.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 5425”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Valmet 6200”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Massey Ferguson MF 5425”540 rpm / 1000 rpmTraktorenlexikon, “Valmet 6200”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the MF 5425 (A) and the 6200-4.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 5425”4WDTraktorenlexikon, “Valmet 6200”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2003–20111996–2007Ahead (a fact, not an advantage)The Massey Ferguson MF 5425 (A) is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson MF 5425 (A) has 17% more lift (744 kg / 1,639 lb) than the VALMET 6200-4 (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson MF 5425 (A) has 16% higher maximum permissible mass (1,060 kg / 2,337 lb) than the VALMET 6200-4 (both maximum permissible mass, as stated by the source).
  • The Massey Ferguson MF 5425 (A) is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the MF 5425 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6200-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources