Massey Ferguson MF 4325 (A) vs VALMET 465 (465-4)

11 material differences · fewer than 12

Tractor one

2001–2003

No measured PTO figure

Tractor two

1993–1997

No measured PTO figure

Which should you choose?

Read our verdict on the MF 4325 (A) and the 465 (465-4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 4325 (A) and VALMET 465 (465-4), field by field
Field	MF 4325 (A)	465 (465-4)	Gap
Engine
Engine power, claimed claimed	66.1 hp	69.1 hp	—
Engine declared	Perkins 1004.40	VALMET 320 DS	differs
Displacement declared	3.99 L	3.30 L	+21% MF 4325 (A)
Maximum torque declared	193 lb·ft · 261 N·m	192 lb·ft · 260 N·m	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	dry LuK double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	—	14.5 gpm · 55.0 L/min	—
Pressure declared	2,031 psi · 140 bar	2,901 psi · 200 bar	+43% 465 (465-4)
Three-point lift at ends declared	6,744 lb · 3,059 kg	5,688 lb · 2,580 kg	+19% MF 4325 (A)
Rear PTO speeds declared	540/1000/540E rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	6,936 lb · 3,146 kg	6,217 lb · 2,820 kg	+12% MF 4325 (A)
Maximum permissible mass declared	14,330 lb · 6,500 kg	—	—
Wheelbase declared	92.5 in · 2,350 mm	83.1 in · 2,112 mm	+11% MF 4325 (A)
Length declared	151.6 in · 3,850 mm	146.1 in · 3,710 mm	—
Width declared	76.8 in · 1,950 mm	79.9 in · 2,030 mm	—
Height declared	96.5 in · 2,450 mm	102.6 in · 2,605 mm	+6% 465 (465-4)
Ground clearance declared	19.3 in · 490 mm	15.9 in · 405 mm	+21% MF 4325 (A)
Turning radius, braked declared	—	11.5 ft · 3.50 m	—
Fuel tank declared	88.8 qt · 84.0 L	77.1 qt · 73.0 L	+15% MF 4325 (A)

Source

Source