8 material differences · fewer than 12
Tractor oneMassey Ferguson MF 4325 (A)2001–2003No measured PTO figureTractor twoNew Holland 48351996–1998No measured PTO figure
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (2001–2003; 1996–1998). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | MF 4325 (A) | 4835 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 66.1 hp | 64 hp | — |
| Engine declared | Perkins 1004.40 | Iveco 8045.06 R | differs |
| Displacement declared | 3.99 L | 3.61 L | +10% MF 4325 (A) |
| Maximum torque declared | 193 lb·ft · 261 N·m | 146 lb·ft · 198 N·m | +32% MF 4325 (A) |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Single-disc dry clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Open centre | — |
| Hydraulic control declared | — | Constant flow | — |
| Pump flow declared | — | 12.2 gpm · 46.0 L/min | — |
| Pressure declared | 2,031 psi · 140 bar | — | — |
| Rear PTO speeds declared | 540/1000/540E rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,936 lb · 3,146 kg | 7,209 lb · 3,270 kg | — |
| Maximum permissible mass declared | 14,330 lb · 6,500 kg | — | — |
| Wheelbase declared | 92.5 in · 2,350 mm | 92.1 in · 2,340 mm | — |
| Length declared | 151.6 in · 3,850 mm | 156.7 in · 3,980 mm | — |
| Width declared | 76.8 in · 1,950 mm | 72.4 in · 1,840 mm | +6% MF 4325 (A) |
| Ground clearance declared | 19.3 in · 490 mm | 13.8 in · 350 mm | +40% MF 4325 (A) |
| Fuel tank declared | 88.8 qt · 84.0 L | 116.2 qt · 110 L | +31% 4835 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 4325 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 4325”
New Holland 4835 sources
- Source: Traktorenlexikon, “New Holland 4835 (T)”
- Source: Traktorenlexikon, “New Holland 4835 Turbo”