Massey Ferguson MF 4255 (A) vs New Holland T 5050

9 material differences · fewer than 12

Tractor one

1997–2001

No measured PTO figure

Tractor two

2008–2012

No measured PTO figure

Which should you choose?

Read our verdict on the MF 4255 (A) and the T 5050 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 9 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 4255 (A) and New Holland T 5050, field by field
Field	MF 4255 (A)	T 5050	Gap
Engine
Engine power, claimed claimed	93.7 hp	95.6 hp	—
Engine declared	Perkins 1004-4 THR2	IVECO-NEF F4CE 9484 M	differs
Displacement declared	3.99 L	4.49 L	+12% T 5050
Maximum torque declared	248 lb·ft · 336 N·m	309 lb·ft · 419 N·m	+25% T 5050
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated, dry and air-cooled single-disc clutch	electrohydraulically operated wet multi-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	17.2 gpm · 65.0 L/min	17.5 gpm · 66.1 L/min	—
Pressure declared	3,104–3,481 psi · 214–240 bar	3,336 psi · 230 bar	differs
Three-point lift at ends declared	7,937 lb · 3,600 kg	12,655 lb · 5,740 kg	+59% T 5050
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,135 lb · 3,690 kg	8,168 lb · 3,705 kg	—
Maximum permissible mass declared	15,432 lb · 7,000 kg	14,991 lb · 6,800 kg	—
Wheelbase declared	92.5 in · 2,350 mm	92.2 in · 2,342 mm	—
Length declared	157.9 in · 4,010 mm	158.7 in · 4,030 mm	—
Width declared	78.3 in · 1,990 mm	78.9 in · 2,005 mm	—
Height declared	102.8 in · 2,610 mm	100.2 in · 2,546 mm	—
Ground clearance declared	11.4 in · 290 mm	19.2 in · 488 mm	+68% T 5050
Fuel tank declared	196.5 qt · 186.0 L	134.2 qt · 127.0 L	+46% MF 4255 (A)

Source

Source