10 material differences · fewer than 12

Tractor oneMassey Ferguson MF 4255 (A)1997–2001No measured PTO figureTractor twoNew Holland 7635 (A)1996–1998No measured PTO figure

Which should you choose?

Read our verdict on the MF 4255 (A) and the 7635 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 4255 (A) and New Holland 7635 (A), field by field
Field	MF 4255 (A)	7635 (A)	Gap
Engine
Engine power, claimed claimed	93.7 hp	93.7 hp	—
Engine declared	Perkins 1004-4 THR2	Iveco 8045.25 K	differs
Displacement declared	3.99 L	3.91 L	—
Maximum torque declared	248 lb·ft · 336 N·m	209 lb·ft · 284 N·m	+18% MF 4255 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated, dry and air-cooled single-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	17.2 gpm · 65.0 L/min	15.9 gpm · 60.0 L/min	+8% MF 4255 (A)
Pressure declared	3,104–3,481 psi · 214–240 bar	2,103–2,466 psi · 145–170 bar	differs
Three-point lift, at the coupling points declared	7,937 lb · 3,600 kg	9,259 lb · 4,200 kg	+17% 7635 (A)
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,135 lb · 3,690 kg	7,496 lb · 3,400 kg	+9% MF 4255 (A)
Maximum permissible mass declared	15,432 lb · 7,000 kg	13,228 lb · 6,000 kg	+17% MF 4255 (A)
Wheelbase declared	92.5 in · 2,350 mm	92.2 in · 2,342 mm	—
Length declared	157.9 in · 4,010 mm	157.5 in · 4,000 mm	—
Width declared	78.3–102.0 in · 1,990–2,590 mm	79.5–105.7 in · 2,020–2,685 mm	—
Height, over the cab declared	102.8 in · 2,610 mm	100.4 in · 2,550 mm	—
Ground clearance declared	11.4 in · 290 mm	19.7 in · 500 mm	+72% 7635 (A)
Turning radius, braked declared	—	13.9 ft · 4.25 m	—
Fuel tank declared	196.5 qt · 186.0 L	121.5 qt · 115.0 L	+62% MF 4255 (A)

Source

Source