Massey Ferguson MF 4255 (A) or Massey Ferguson MF 3080 (A)?

Which should you choose?

On performance, every comparable figure that differs favours the Massey Ferguson MF 4255 (A): hydraulic flow. On features, the Massey Ferguson MF 3080 (A) is ahead on forward gears.

  • The Massey Ferguson MF 4255 (A) suits loader and hydraulic implement work better on this data: 27% (13.8 L/min / 3.6 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Massey Ferguson MF 4255 (A) and Massey Ferguson MF 3080 (A), with the call on each
QuestionMF 4255 (A)MF 3080 (A)Call
Which puts more power through the PTO shaft?62.9 kW (84.4 hp)Traktorenlexikon, “Massey Ferguson MF 4255”62.9 kW (84.3 hp)Traktorenlexikon, “Massey Ferguson MF 3080”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 4255 (A) and the MF 3080 (A).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the MF 4255 (A) and the MF 3080 (A).
Which pumps more oil for implements?65.0 L/min (17.2 gpm)Traktorenlexikon, “Massey Ferguson MF 4255”51.2 L/min (13.5 gpm)Traktorenlexikon, “Massey Ferguson MF 3080”AheadThe Massey Ferguson MF 4255 (A) has 27% more hydraulic flow (13.8 L/min / 3.6 gpm) than the Massey Ferguson MF 3080 (A) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?3,600 kg (7,937 lb)Traktorenlexikon, “Massey Ferguson MF 4255”3,809 kg (8,397 lb)Traktorenlexikon, “Massey Ferguson MF 3080”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?3,690 kg (8,135 lb)Traktorenlexikon, “Massey Ferguson MF 4255”5,170 kg (11,398 lb)Traktorenlexikon, “Massey Ferguson MF 3080”Ahead (a fact, not an advantage)The Massey Ferguson MF 3080 (A) is 40% heavier (1,480 kg / 3,263 lb) than the Massey Ferguson MF 4255 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?7,000 kg (15,432 lb)Traktorenlexikon, “Massey Ferguson MF 4255”7,000 kg (15,432 lb)Traktorenlexikon, “Massey Ferguson MF 3080”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?12 to 24Traktorenlexikon, “Massey Ferguson MF 4255”32Traktorenlexikon, “Massey Ferguson MF 3080”AheadThe Massey Ferguson MF 3080 (A) has 33% more forward gears (8 gears) than the Massey Ferguson MF 4255 (A) (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the MF 4255 (A) and the MF 3080 (A).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 4255”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 3080”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 4255”540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 3080”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Massey Ferguson MF 4255”independentTraktorenlexikon, “Massey Ferguson MF 3080”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 4255”2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 3080”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1997–20011989–1997Ahead (a fact, not an advantage)The Massey Ferguson MF 4255 (A) is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson MF 4255 (A) has 27% more hydraulic flow (13.8 L/min / 3.6 gpm) than the Massey Ferguson MF 3080 (A) (both pump flow, as stated by the source).
  • The Massey Ferguson MF 3080 (A) is 40% heavier (1,480 kg / 3,263 lb) than the Massey Ferguson MF 4255 (A) (both unladen weight, as stated by the source).
  • The Massey Ferguson MF 3080 (A) has 33% more forward gears (8 gears) than the Massey Ferguson MF 4255 (A) (both forward gears, as stated by the source).
  • The Massey Ferguson MF 4255 (A) is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.

← Every figure for both machines, side by side, with sources