Massey Ferguson MF 4245 (A) vs VALMET 900

9 material differences · fewer than 12

Tractor one

1997–2001

No measured PTO figure

Tractor two

1997–2002

No measured PTO figure

Which should you choose?

Read our verdict on the MF 4245 (A) and the 900 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 4245 (A) and VALMET 900, field by field
Field	MF 4245 (A)	900	Gap
Engine
Engine power, claimed claimed	83.9 hp	88.8 hp	+6% 900
Engine declared	Perkins 1004.4 TLR	VALMET 420 DS or DSRE	differs
Displacement declared	3.99 L	4.40 L	+10% 900
Maximum torque declared	214 lb·ft · 290 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal operated dry air cooled single plate clutch	dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Constant flow	—
Pump flow declared	—	14.7 gpm · 55.7 L/min	—
Pressure declared	3,104–3,481 psi · 214–240 bar	2,901 psi · 200 bar	differs
Three-point lift at ends declared	7,408 lb · 3,360 kg	7,419 lb · 3,365 kg	—
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	7,915 lb · 3,590 kg	7,408 lb · 3,360 kg	+7% MF 4245 (A)
Maximum permissible mass declared	15,432 lb · 7,000 kg	—	—
Wheelbase declared	92.5 in · 2,350 mm	88.3 in · 2,244 mm	—
Length declared	157.9 in · 4,010 mm	152.6 in · 3,877 mm	—
Width declared	78.3 in · 1,990 mm	85.7 in · 2,177 mm	+9% 900
Height declared	103.5 in · 2,630 mm	106.3 in · 2,700 mm	—
Ground clearance declared	11.4 in · 290 mm	19.9 in · 505 mm	+74% 900
Turning radius, braked declared	—	15.7 ft · 4.80 m	—
Fuel tank declared	196.5 qt · 186.0 L	83.5 qt · 79.0 L	+135% MF 4245 (A)

Source

Source