Massey Ferguson MF 4245 (A) vs SAME Explorer 80 (DT)

9 material differences · fewer than 12

Tractor one

1997–2001

No measured PTO figure

Tractor two

1986–1990

No measured PTO figure

Which should you choose?

Read our verdict on the MF 4245 (A) and the Explorer 80 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 4245 (A) and SAME Explorer 80 (DT), field by field
Field	MF 4245 (A)	Explorer 80 (DT)	Gap
Engine
Engine power, claimed claimed	83.9 hp	78.9 hp	+6% MF 4245 (A)
Engine declared	Perkins 1004.4 TLR	SAME 1000.4 A 1	differs
Displacement declared	3.99 L	4.00 L	—
Maximum torque declared	214 lb·ft · 290 N·m	193 lb·ft · 261 N·m	+11% MF 4245 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal operated dry air cooled single plate clutch	Pedal-operated dry SAME single-disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	10.7 gpm · 40.5 L/min	—
Pressure declared	3,104–3,481 psi · 214–240 bar	1,740 psi · 120 bar	differs
Three-point lift at ends declared	7,408 lb · 3,360 kg	7,606 lb · 3,450 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,915 lb · 3,590 kg	6,614 lb · 3,000 kg	+20% MF 4245 (A)
Maximum permissible mass declared	15,432 lb · 7,000 kg	—	—
Wheelbase declared	92.5 in · 2,350 mm	95.1 in · 2,415 mm	—
Length declared	157.9 in · 4,010 mm	145.2 in · 3,687 mm	+9% MF 4245 (A)
Width declared	78.3 in · 1,990 mm	73.6 in · 1,870 mm	+6% MF 4245 (A)
Height declared	103.5 in · 2,630 mm	102.1 in · 2,593 mm	—
Ground clearance declared	11.4 in · 290 mm	20.5 in · 520 mm	+79% Explorer 80 (DT)
Turning radius, braked declared	—	9.6 ft · 2.94 m	—
Fuel tank declared	196.5 qt · 186.0 L	105.7 qt · 100.0 L	+86% MF 4245 (A)

Source

Source