Massey Ferguson MF 4235 (A) vs SAME Explorer 75 (DT)

10 material differences · fewer than 12

Tractor one

1997–2001

No measured PTO figure

Tractor two

1985–1987

No measured PTO figure

Which should you choose?

Read our verdict on the MF 4235 (A) and the Explorer 75 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 3 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 4235 (A) and SAME Explorer 75 (DT), field by field
Field	MF 4235 (A)	Explorer 75 (DT)	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	Perkins 4.41	SAME 916.4 A	differs
Displacement declared	4.08 L	3.67 L	+11% MF 4235 (A)
Maximum torque declared	—	207 lb·ft · 280 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal operated, dry and air cooled single disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	9.5 gpm · 36.0 L/min	—
Pressure declared	—	1,740 psi · 120 bar	—
Three-point lift at ends declared	6,856 lb · 3,110 kg	7,606 lb · 3,450 kg	+11% Explorer 75 (DT)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	7,915 lb · 3,590 kg	6,614 lb · 3,000 kg	+20% MF 4235 (A)
Maximum permissible mass declared	15,432 lb · 7,000 kg	—	—
Wheelbase declared	92.5 in · 2,350 mm	95.1 in · 2,415 mm	—
Length declared	157.9 in · 4,010 mm	145.2 in · 3,687 mm	+9% MF 4235 (A)
Width declared	78.3 in · 1,990 mm	73.6 in · 1,870 mm	+6% MF 4235 (A)
Height declared	103.7 in · 2,635 mm	102.1 in · 2,593 mm	—
Ground clearance declared	11.4 in · 290 mm	20.5 in · 520 mm	+79% Explorer 75 (DT)
Turning radius, braked declared	—	9.6 ft · 2.94 m	—
Fuel tank declared	196.5 qt · 186.0 L	116.2 qt · 110.0 L	+69% MF 4235 (A)

Source

Source