9 material differences · fewer than 12

Tractor oneMassey Ferguson MF 4235 (A)1997–2001No measured PTO figureTractor twoNew Holland TL 80 (A)1998–2004No measured PTO figure

Which should you choose?

Read our verdict on the MF 4235 (A) and the TL 80 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 4235 (A) and New Holland TL 80 (A), field by field
Field	MF 4235 (A)	TL 80 (A)	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	Perkins 4.41	Iveco 8045.05 R	differs
Displacement declared	4.08 L	3.91 L	—
Maximum torque declared	—	188 lb·ft · 255 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal operated, dry and air cooled single disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	—	15.9 gpm · 60.0 L/min	—
Pressure declared	—	2,103 psi · 145 bar	—
Three-point lift, at the coupling points declared	6,856 lb · 3,110 kg	7,385 lb · 3,350 kg	+8% TL 80 (A)
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,915 lb · 3,590 kg	9,149 lb · 4,150 kg	+16% TL 80 (A)
Maximum permissible mass declared	15,432 lb · 7,000 kg	11,464 lb · 5,200 kg	+35% MF 4235 (A)
Wheelbase declared	92.5 in · 2,350 mm	92.2 in · 2,342 mm	—
Length declared	157.9 in · 4,010 mm	168.5 in · 4,280 mm	+7% TL 80 (A)
Width declared	78.3–102.0 in · 1,990–2,590 mm	78.9–102.8 in · 2,005–2,610 mm	—
Height, over the cab declared	103.7 in · 2,635 mm	97.4 in · 2,475 mm	+6% MF 4235 (A)
Ground clearance declared	11.4 in · 290 mm	15.0 in · 380 mm	+31% TL 80 (A)
Turning radius, braked declared	—	11.3 ft · 3.45 m	—
Fuel tank declared	196.5 qt · 186.0 L	121.5 qt · 115.0 L	+62% MF 4235 (A)

Source

Source