12 material differences
Tractor oneMassey Ferguson MF 4220 (A)1997–2001No measured PTO figureTractor twoNew Holland TN-65 D/S (A)1999–2003No measured PTO figure
Which should you choose?
Read our verdict on the MF 4220 (A) and the TN-65 D/S (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | MF 4220 (A) | TN-65 D/S (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59.3 hp | 59.3 hp | — |
| Engine declared | Perkins 903.27 Turbo | IVECO 8035.05 R | differs |
| Displacement declared | 2.50 L | 2.93 L | +17% TN-65 D/S (A) |
| Maximum torque declared | 164 lb·ft · 223 N·m | 152 lb·ft · 206 N·m | +8% MF 4220 (A) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | — | 12.5 gpm · 47.4 L/min | — |
| Pressure declared | 2,031 psi · 140 bar | 2,466 psi · 170 bar | +21% TN-65 D/S (A) |
| Three-point lift, at the coupling points declared | 4,916 lb · 2,230 kg | 5,886 lb · 2,670 kg | +20% TN-65 D/S (A) |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,258 lb · 2,385 kg | 6,746 lb · 3,060 kg | +28% TN-65 D/S (A) |
| Maximum permissible mass declared | — | 9,700 lb · 4,400 kg | — |
| Wheelbase declared | 83.9 in · 2,130 mm | 83.9 in · 2,130 mm | — |
| Length declared | 147.2 in · 3,740 mm | 156.7 in · 3,980 mm | +6% TN-65 D/S (A) |
| Width declared | 78.0–90.3 in · 1,982–2,294 mm | 85.0–92.5 in · 2,158–2,350 mm | differs |
| Ground clearance declared | 8.3 in · 210 mm | 15.0 in · 380 mm | +81% TN-65 D/S (A) |
| Turning radius, braked declared | — | 10.5 ft · 3.20 m | — |
| Fuel tank declared | 88.8 qt · 84.0 L | 74.0 qt · 70.0 L | +20% MF 4220 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 4220 (A) sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 4220”
New Holland TN-65 D/S (A) sources
Source
- Source: Traktorenlexikon, “New Holland TN65 D/S”