10 material differences · fewer than 12
Tractor oneMassey Ferguson MF 4220 (A)1997–2001No measured PTO figureTractor twoNew Holland 46351996–1998No measured PTO figure
Which should you choose?
Read our verdict on the MF 4220 (A) and the 4635 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | MF 4220 (A) | 4635 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59.3 hp | 59.3 hp | — |
| Engine declared | Perkins 903.27 Turbo | Iveco 8035.05 | differs |
| Displacement declared | 2.50 L | 2.93 L | +17% 4635 |
| Maximum torque declared | 164 lb·ft · 223 N·m | 138 lb·ft · 187 N·m | +19% MF 4220 (A) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | — | 11.8 gpm · 44.5 L/min | — |
| Pressure declared | 2,031 psi · 140 bar | 2,103 psi · 145 bar | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,258 lb · 2,385 kg | 8,686 lb · 3,940 kg | +65% 4635 |
| Maximum permissible mass declared | — | 11,464 lb · 5,200 kg | — |
| Wheelbase declared | 83.9 in · 2,130 mm | 92.2 in · 2,342 mm | +10% 4635 |
| Length declared | 147.2 in · 3,740 mm | 153.9 in · 3,910 mm | — |
| Width declared | 78.0–90.3 in · 1,982–2,294 mm | 83.5–99.2 in · 2,120–2,520 mm | differs |
| Ground clearance declared | 8.3 in · 210 mm | 18.9 in · 480 mm | +129% 4635 |
| Turning radius, braked declared | — | 12.4 ft · 3.79 m | — |
| Fuel tank declared | 88.8 qt · 84.0 L | 121.5 qt · 115.0 L | +37% 4635 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 4220 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 4220”
New Holland 4635 sources
- Source: Traktorenlexikon, “New Holland 4635”
- Source: Traktorenlexikon, “Ford 4635”