Which should you choose?
Read our verdict on the 2L2 and the 2L3 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
4 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | 2L2 | 2L3 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 24.5 hp | 24.5 hp | — |
| Engine declared | MAN/Güldner D 9532 M 180 | MAN/Güldner D 9532 M 180 | — |
| Displacement declared | 1.85 L | 1.85 L | — |
| Maximum torque declared | 69 lb·ft · 93 N·m | 69 lb·ft · 93 N·m | — |
| Transmission | |||
| Top speed declared | 11.4–12.4 mph · 18.4–20.0 km/h | 12.4 mph · 20 km/h | differs |
| Clutch declared | Komet single-disc clutch | Single-plate dry clutch from Fichtel & Sachs | differs |
| Hydraulics & hitch | |||
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 2,866 lb · 1,300 kg | 3,020 lb · 1,370 kg | +5% 2L3 |
| Wheelbase declared | 80.2 in · 2,036 mm | 70.3 in · 1,786 mm | +14% 2L2 |
| Length declared | — | 111.0 in · 2,820 mm | — |
| Width declared | 56.9–59.9 in · 1,445–1,522 mm | 57.5–59.7 in · 1,460–1,516 mm | — |
| Ground clearance declared | 19.5 in · 495 mm | 19.5 in · 495 mm | — |
| Turning radius, braked declared | 8.5 ft · 2.60 m | 8.5 ft · 2.60 m | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
MAN 2L2 sources
Source
- Source: Traktorenlexikon, “MAN 2L2”
MAN 2L3 sources
Source
- Source: Traktorenlexikon, “MAN 2L3”
- Source: Traktorenlexikon, “MAN 2L2”