8 material differences · fewer than 12
Tractor oneLeyland 2551973–1975No measured PTO figureTractor twoVOLVO-BM T 4301969–1978No measured PTO figure
Which should you choose?
Read our verdict on the 255 and the T 430 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 255 | T 430 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 55 hp | 42.0 hp | +31% 255 |
| Engine declared | LEYLAND-MOTORS 4/98 DT | BM-VOLVO (PERKINS) D-25 (3.152) | differs |
| Displacement declared | 3.77 L | 2.50 L | +51% 255 |
| Maximum torque declared | 160 lb·ft · 217 N·m | — | — |
| Transmission | |||
| Top speed declared | 16.2 mph · 26 km/h | 18.6 mph · 30 km/h | +15% T 430 |
| Clutch declared | Dry BORG & BECK double clutch | Pedal-operated dry LAYCOCK double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.8 gpm · 29.5 L/min | 8.7 gpm · 33.0 L/min | +12% T 430 |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,445 lb · 2,470 kg | 5,287 lb · 2,398 kg | — |
| Wheelbase declared | 79.9 in · 2,029 mm | 82.7 in · 2,101 mm | — |
| Length declared | 131.5 in · 3,340 mm | 129.9 in · 3,300 mm | — |
| Width declared | 63.8 in · 1,621 mm | 69.7 in · 1,770 mm | +9% T 430 |
| Ground clearance declared | 16.9 in · 429 mm | 16.1 in · 410 mm | — |
| Turning radius, braked declared | 10.5 ft · 3.20 m | 10.2 ft · 3.10 m | — |
| Fuel tank declared | 72.0 qt · 68.1 L | 47.6 qt · 45.0 L | +51% 255 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Leyland 255 sources
Source
- Source: Traktorenlexikon, “Leyland 255”
VOLVO-BM T 430 sources
Source
- Source: Traktorenlexikon, “Bolinder-Munktell T 430 Buster”