13 material differences
Tractor oneLeyland 21001972–1980No measured PTO figureTractor twoMassey Ferguson MF 298 (A)1979–1986No measured PTO figure
Which should you choose?
Read our verdict on the 2100 and the MF 298 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 2100 | MF 298 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 100.0 hp | 86.8 hp | +15% 2100 |
| Engine declared | LEYLAND-MOTORS 6/98 NT | Perkins A 4.318.2 | differs |
| Displacement declared | 5.66 L | 5.21 L | +9% 2100 |
| Maximum torque declared | 276 lb·ft · 374 N·m | 261 lb·ft · 354 N·m | +6% 2100 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Dry BORG & BECK double clutch | Pedal-operated, dry and air-cooled single clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 11.0 gpm · 41.6 L/min | 8.3 gpm · 31.6 L/min | +32% 2100 |
| Three-point lift, at the coupling points declared | 6,030 lb · 2,735 kg | 5,049 lb · 2,290 kg | +19% 2100 |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,911 lb · 4,042 kg | 7,033 lb · 3,190 kg | +27% 2100 |
| Wheelbase declared | 90.0 in · 2,286 mm | 95.7 in · 2,432 mm | +6% MF 298 (A) |
| Length declared | 150.0 in · 3,810 mm | 161.4 in · 4,100 mm | +8% MF 298 (A) |
| Width declared | 85.5 in · 2,172 mm | 79.5 in · 2,020 mm | +8% 2100 |
| Ground clearance declared | 15.8 in · 402 mm | 15.7 in · 400 mm | — |
| Turning radius, braked declared | 12.4 ft · 3.77 m | 13.9 ft · 4.24 m | +12% MF 298 (A) |
| Fuel tank declared | 72.1 qt · 68.2 L | 108.8 qt · 103 L | +51% MF 298 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Leyland 2100 sources
Source
- Source: Traktorenlexikon, “Leyland 2100”
Massey Ferguson MF 298 (A) sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 298”
- Source: Traktorenlexikon, “Massey Ferguson MF 698”