6 material differences · fewer than 12

Tractor oneLanz D 90061943–1945No measured PTO figureTractor twoSOMECA DA-50 L1955–1957No measured PTO figure

Which should you choose?

Read our verdict on the D 9006 and the DA-50 L → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

6 material differences · 2 fields identical or within 5%, which is not counted as material

Lanz D 9006 and SOMECA DA-50 L, field by field
FieldD 9006DA-50 LGap
Engine
Engine power, claimed claimed39.3 hp38.5 hp—
Engine declared—O.M.-MILANO COD-40—
Displacement declared—3.77 L—
Maximum torque declared—137 lb·ft · 186 N·m—
Transmission
Top speed declared11.6 mph · 18.6 km/h13.7 mph · 22 km/h+18% DA-50 L
Hydraulics & hitch
Pump flow declared—3.4 gpm · 13.0 L/min—
Pressure declared—1,784 psi · 123 bar—
Rear PTO speeds declared630540 rpmdiffers
Weight & dimensions
Unladen weight declared7,716 lb · 3,500 kg4,910 lb · 2,227 kg+57% D 9006
Wheelbase declared77.8 in · 1,977 mm79.9 in · 2,030 mm—
Length declared151.8 in · 3,855 mm130.3 in · 3,310 mm+16% D 9006
Width declared70.6 in · 1,792 mm68.7–95.1 in · 1,745–2,415 mmdiffers
Ground clearance declared11.8 in · 300 mm14.3 in · 364 mm+21% DA-50 L
Turning radius, braked declared—5.2 ft · 1.57 m—
Fuel tank declared—59.2 qt · 56.0 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Lanz D 9006 sources

Source
  • Source: Traktorenlexikon, “Lanz D 9006 Reingas”

SOMECA DA-50 L sources

Source
  • Source: Traktorenlexikon, “Someca DA 50 L”
  • Source: Traktorenlexikon, “Someca DA 50”