9 material differences · fewer than 12
Tractor oneLanz D 7511/31935–1936No measured PTO figureTractor twoZETOR Z-251946–1951No measured PTO figure
Which should you choose?
Read our verdict on the D 7511/3 and the Z-25 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | D 7511/3 | Z-25 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 24.5 hp | 24.7 hp | — |
| Transmission | |||
| Top speed declared | 9.3 mph · 15.0 km/h | 12.4 mph · 20 km/h | +33% Z-25 |
| Clutch declared | Pedal operated three-jaw clutch with clutch brake | Pedal-operated dry single-plate clutch | differs |
| Hydraulics & hitch | |||
| Rear PTO speeds declared | 760 | 533 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,143 lb · 3,240 kg | 4,026 lb · 1,826 kg | +77% D 7511/3 |
| Wheelbase declared | 64.8 in · 1,645 mm | 74.8 in · 1,900 mm | +16% Z-25 |
| Length declared | 107.7 in · 2,735 mm | 126.0 in · 3,200 mm | +17% Z-25 |
| Width declared | 63.4 in · 1,610 mm | 70.9 in · 1,800 mm | +12% Z-25 |
| Ground clearance declared | 8.5 in · 215 mm | 12.6 in · 320 mm | +49% Z-25 |
| Fuel tank declared | 52.8 qt · 50 L | 47.6 qt · 45.0 L | +11% D 7511/3 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lanz D 7511/3 sources
- Source: Traktorenlexikon, “Lanz D 7511/3”
ZETOR Z-25 sources
- Source: Traktorenlexikon, “Zetor 25”