6 material differences · fewer than 12
Tractor oneLanz D 7511/31935–1936No measured PTO figureTractor twoSchlüter GZV 251941–1947No measured PTO figure
Which should you choose?
Read our verdict on the D 7511/3 and the GZV 25 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | D 7511/3 | GZV 25 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 24.5 hp | 24.5 hp | — |
| Transmission | |||
| Top speed declared | 9.3 mph · 15.0 km/h | 14.3 mph · 23 km/h | +53% GZV 25 |
| Clutch declared | Pedal operated three-jaw clutch with clutch brake | — | — |
| Hydraulics & hitch | |||
| Rear PTO speeds declared | 760 | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,143 lb · 3,240 kg | 4,850 lb · 2,200 kg | +47% D 7511/3 |
| Wheelbase declared | 64.8 in · 1,645 mm | 77.6 in · 1,970 mm | +20% GZV 25 |
| Length declared | 107.7 in · 2,735 mm | 133.9 in · 3,400 mm | +24% GZV 25 |
| Width declared | 63.4 in · 1,610 mm | 63.0 in · 1,600 mm | — |
| Ground clearance declared | 8.5 in · 215 mm | 13.8 in · 350 mm | +63% GZV 25 |
| Fuel tank declared | 52.8 qt · 50 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lanz D 7511/3 sources
- Source: Traktorenlexikon, “Lanz D 7511/3”
Schlüter GZV 25 sources
- Source: Traktorenlexikon, “Schlüter GZV 25”