2 material differences · fewer than 12
Tractor oneLanz D 75061934–1935No measured PTO figureTractor twoLanz D 75111934–1935No measured PTO figure
Which should you choose?
Read our verdict on the D 7506 and the D 7511 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
2 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | D 7506 | D 7511 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 19.6 hp | 19.6 hp | — |
| Transmission | |||
| Top speed declared | 9.4 mph · 15.2 km/h | — | — |
| Clutch declared | Pedal operated three-shoe clutch including clutch brake | Pedal operated three-shoe clutch including clutch brake | — |
| Hydraulics & hitch | |||
| Rear PTO speeds declared | 760 | 760 | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,173 lb · 2,800 kg | 7,143 lb · 3,240 kg | +16% D 7511 |
| Wheelbase declared | 66.3 in · 1,683 mm | 64.8 in · 1,645 mm | — |
| Length declared | 112.0 in · 2,845 mm | 107.7 in · 2,735 mm | — |
| Width declared | 62.9 in · 1,598 mm | 63.4 in · 1,610 mm | — |
| Ground clearance declared | 10.6 in · 270 mm | 8.5 in · 215 mm | +26% D 7506 |
| Fuel tank declared | 52.8 qt · 50 L | 52.8 qt · 50 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Lanz D 7506 sources
- Source: Traktorenlexikon, “Lanz D 7506/2”
Lanz D 7511 sources
- Source: Traktorenlexikon, “Lanz D 7511/2”