Landini 5860 (DT) TL 38 N/M (TL-38 DT/M) or WHITE 6045?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 5860 (DT) TL 38 N/M (TL-38 DT/M) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6045 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Landini 5860 (DT) TL 38 N/M (TL-38 DT/M) suits loader and hydraulic implement work better on this data: 21% (363 kg / 800 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Landini 5860 (DT) TL 38 N/M (TL-38 DT/M) and WHITE 6045, with the call on each
Question5860 (DT) TL 38 N/M (TL-38 DT/M)6045Call
Which puts more power through the PTO shaft?35.3 kW (47.3 hp)Traktorenlexikon, “Landini R 5560 L (DT)”35.3 kW (47.3 hp)Traktorenlexikon, “AGCO-White 6045”Not comparableNot comparable on power at the PTO shaft: the 5860 (DT) TL 38 N/M (TL-38 DT/M) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6045 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 5860 (DT) TL 38 N/M (TL-38 DT/M) and the 6045.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 5860 (DT) TL 38 N/M (TL-38 DT/M) and the 6045.
Which pumps more oil for implements?—47.4 L/min (12.5 gpm)Traktorenlexikon, “AGCO-White 6045”No figureNo call on hydraulic flow: no figure on record for the 5860 (DT) TL 38 N/M (TL-38 DT/M).
Which lifts more on the three-point hitch?2,100 kg (4,630 lb)Traktorenlexikon, “Landini R 5560 L (DT)”1,737 kg (3,829 lb)Traktorenlexikon, “White 6045”AheadThe Landini 5860 (DT) TL 38 N/M (TL-38 DT/M) has 21% more lift (363 kg / 800 lb) than the WHITE 6045 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,120 kg (4,674 lb)Traktorenlexikon, “Landini R 5560 L (DT)”2,049 kg (4,517 lb)Traktorenlexikon, “AGCO-White 6045”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 5860 (DT) TL 38 N/M (TL-38 DT/M) and the 6045.
Which has the wider choice of gears?12 to 24Traktorenlexikon, “Landini R 5560 L (DT)”12 to 16Traktorenlexikon, “AGCO-White 6045”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 5860 (DT) TL 38 N/M (TL-38 DT/M) and the 6045.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Landini R 5560 L (DT)”30 km/h (18.6 mph)Traktorenlexikon, “AGCO-White 6045”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Landini R 5560 L (DT)”540 rpmTraktorenlexikon, “AGCO-White 6045”AheadThe Landini 5860 (DT) TL 38 N/M (TL-38 DT/M) offers 1000 rpm at the PTO, which the WHITE 6045 does not (as stated by the sources).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “White 6045”No figureNo call on PTO independence: not stated for the 5860 (DT) TL 38 N/M (TL-38 DT/M).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Landini R 5560 L (DT)”Two-wheel or four-wheel driveTraktorenlexikon, “White 6045”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1988–20001996–1999Ahead (a fact, not an advantage)The WHITE 6045 is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Landini 5860 (DT) TL 38 N/M (TL-38 DT/M) has 21% more lift (363 kg / 800 lb) than the WHITE 6045 (both lift at the hitch ends, as stated by the source).
  • The Landini 5860 (DT) TL 38 N/M (TL-38 DT/M) offers 1000 rpm at the PTO, which the WHITE 6045 does not (as stated by the sources).
  • The WHITE 6045 is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 5860 (DT) TL 38 N/M (TL-38 DT/M) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6045 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources