10 material differences · fewer than 12

Tractor oneLandini 165 DT1997–2001No measured PTO figureTractor twoVALMET 85501995–2001No measured PTO figure

Which should you choose?

Read our verdict on the 165 DT and the 8550 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Landini 165 DT and VALMET 8550, field by field
Field	165 DT	8550	Gap
Engine
Engine power, claimed claimed	157.8 hp	157.8 hp	—
Engine declared	Perkins 1006-6 THR 4	VALMET 634 DSR (E)	differs
Displacement declared	5.99 L	7.37 L	+23% 8550
Maximum torque declared	426 lb·ft · 577 N·m	458 lb·ft · 621 N·m	+8% 8550
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Pedal-operated dry single-disc clutch designed as driving clutch	Pedal operated dry Fichtel & Sachs single plate clutch	differs
Hydraulics & hitch
Pump flow declared	16.2 gpm · 61.5 L/min	19.4 gpm · 73.6 L/min	+20% 8550
Pressure declared	—	2,031–2,248 psi · 140–155 bar	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,963 lb · 5,880 kg	11,244 lb · 5,100 kg	+15% 165 DT
Maximum permissible mass declared	30,424 lb · 13,800 kg	18,739 lb · 8,500 kg	+62% 165 DT
Wheelbase declared	110.2 in · 2,800 mm	108.2 in · 2,748 mm	—
Length declared	188.2 in · 4,780 mm	194.4 in · 4,937 mm	—
Width declared	97.6 in · 2,480 mm	85.7–105.8 in · 2,178–2,688 mm	differs
Height, over the cab declared	113.8 in · 2,890 mm	109.6 in · 2,785 mm	—
Ground clearance declared	20.5 in · 520 mm	20.5 in · 520 mm	—
Turning radius, braked declared	20.7 ft · 6.30 m	—	—
Fuel tank declared	274.7 qt · 260 L	174.4 qt · 165.0 L	+58% 165 DT

Source

Source