10 material differences · fewer than 12
Tractor oneLandini 165 DT1997–2001No measured PTO figureTractor twoNew Holland 8560 A1996–1999No measured PTO figure
Which should you choose?
Read our verdict on the 165 DT and the 8560 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 165 DT | 8560 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 157.8 hp | 157.8 hp | — |
| Engine declared | Perkins 1006-6 THR 4 | New Holland 675 T-WM | differs |
| Displacement declared | 5.99 L | 7.48 L | +25% 8560 A |
| Maximum torque declared | 426 lb·ft · 577 N·m | 481 lb·ft · 652 N·m | +13% 8560 A |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Pedal-operated dry single-disc clutch designed as driving clutch | Electro-hydraulically operated, oil-immersed New Holland multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 16.2 gpm · 61.5 L/min | 26.0 gpm · 98.4 L/min | +60% 8560 A |
| Pressure declared | — | 2,799 psi · 193 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 12,963 lb · 5,880 kg | 13,636 lb · 6,185 kg | — |
| Maximum permissible mass declared | 30,424 lb · 13,800 kg | 20,944 lb · 9,500 kg | +45% 165 DT |
| Wheelbase declared | 110.2 in · 2,800 mm | 107.2 in · 2,723 mm | — |
| Length declared | 188.2 in · 4,780 mm | 183.1 in · 4,650 mm | — |
| Width declared | 97.6 in · 2,480 mm | 90.9 in · 2,310 mm | +7% 165 DT |
| Ground clearance declared | 20.5 in · 520 mm | 14.5 in · 369 mm | +41% 165 DT |
| Turning radius, braked declared | 20.7 ft · 6.30 m | — | — |
| Fuel tank declared | 274.7 qt · 260 L | 232.5 qt · 220.0 L | +18% 165 DT |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini 165 DT sources
- Source: Traktorenlexikon, “Landini Legend 165”
- Source: Traktorenlexikon, “Massey Ferguson MF 3655”
New Holland 8560 A sources
- Source: Traktorenlexikon, “New Holland 8560”