Landini 130 DT vs VALMET 8150

14 material differences

Tractor one

1993–1997

No measured PTO figure

Tractor two

1995–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 130 DT and the 8150 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 4 fields identical or within 5%, which is not counted as material

Landini 130 DT and VALMET 8150, field by field
Field	130 DT	8150	Gap
Engine
Engine power, claimed claimed	123.2 hp	123.2 hp	—
Engine declared	Perkins 1006-6 THR 2	VALMET 620 DSR or 620 DSRE	differs
Displacement declared	5.99 L	6.59 L	+10% 8150
Maximum torque declared	337 lb·ft · 457 N·m	363 lb·ft · 492 N·m	+8% 8150
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Pedal operated dry single disc clutch as driving clutch	Pedal-operated dry Fichtel & Sachs single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	16.2 gpm · 61.5 L/min	20.4 gpm · 77.4 L/min	+26% 8150
Pressure declared	2,901 psi · 200 bar	3,046 psi · 210 bar	—
Three-point lift at ends declared	14,330 lb · 6,500 kg	12,972 lb · 5,884 kg	+10% 130 DT
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	13,162 lb · 5,970 kg	10,803 lb · 4,900 kg	+22% 130 DT
Maximum permissible mass declared	21,605 lb · 9,800 kg	17,637 lb · 8,000 kg	+23% 130 DT
Wheelbase declared	104.3 in · 2,650 mm	100.7 in · 2,558 mm	—
Length declared	213.4 in · 5,420 mm	190.6 in · 4,840 mm	+12% 130 DT
Width declared	92.1 in · 2,340 mm	84.8 in · 2,155 mm	+9% 130 DT
Height declared	101.6 in · 2,580 mm	109.8 in · 2,790 mm	+8% 8150
Ground clearance declared	20.5 in · 520 mm	17.3 in · 440 mm	+18% 130 DT
Turning radius, braked declared	19.2 ft · 5.85 m	—	—
Fuel tank declared	190.2 qt · 180 L	174.4 qt · 165.0 L	+9% 130 DT

Source

Source