Landini 130 DT or New Holland T 6050 Plus (Traktorenlexikon)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 130 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 6050 Plus has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The New Holland T 6050 Plus suits loader and hydraulic implement work better on this data: 28% (17.2 L/min / 4.5 gpm) more hydraulic flow and 21% (1,364 kg / 3,007 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Landini 130 DT and New Holland T 6050 Plus (Traktorenlexikon), with the call on each
Question130 DTT 6050 PlusCall
Which puts more power through the PTO shaft?91.9 kW (123.2 hp)Traktorenlexikon, “Landini Legend 130”91.9 kW (123.2 hp)Traktorenlexikon, “New Holland T 6050 Plus”Not comparableNot comparable on power at the PTO shaft: the 130 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 6050 Plus has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 130 DT and the T 6050 Plus.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 130 DT and the T 6050 Plus.
Which pumps more oil for implements?61.5 L/min (16.2 gpm)Traktorenlexikon, “Landini Legend 130”78.7 L/min (20.8 gpm)Traktorenlexikon, “New Holland T 6050 Plus”AheadThe New Holland T 6050 Plus has 28% more hydraulic flow (17.2 L/min / 4.5 gpm) than the Landini 130 DT (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?6,500 kg (14,330 lb)Traktorenlexikon, “Landini Legend 130”7,864 kg (17,337 lb)Traktorenlexikon, “New Holland T 6050 Plus”AheadThe New Holland T 6050 Plus has 21% more lift (1,364 kg / 3,007 lb) than the Landini 130 DT (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?5,970 kg (13,162 lb)Traktorenlexikon, “Landini Legend 130”5,290 kg (11,662 lb)Traktorenlexikon, “New Holland T 6050 Plus”Ahead (a fact, not an advantage)The Landini 130 DT is 13% heavier (680 kg / 1,499 lb) than the New Holland T 6050 Plus (both unladen weight, as stated by the source).
Which may carry more ballast and load?9,800 kg (21,605 lb)Traktorenlexikon, “Landini Legend 130”9,000 kg (19,842 lb)Traktorenlexikon, “New Holland T 6050 Plus”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?36 to 72Traktorenlexikon, “Landini Legend 130”16 to 24Traktorenlexikon, “New Holland T 6050 Plus”AheadThe Landini 130 DT has 50% more forward gears (12 gears) than the New Holland T 6050 Plus (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 130 DT and the T 6050 Plus.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Landini Legend 130”40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “New Holland T 6050 Plus”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Landini Legend 130”540/540E/1000 rpmTraktorenlexikon, “New Holland T 6050 Plus”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Landini Legend 130”independentTraktorenlexikon, “New Holland T 6050 Plus”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Landini Legend 130”4WDTraktorenlexikon, “New Holland T 6050 Plus”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1993–19972007–2012Ahead (a fact, not an advantage)The New Holland T 6050 Plus is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The New Holland T 6050 Plus has 28% more hydraulic flow (17.2 L/min / 4.5 gpm) than the Landini 130 DT (both pump flow, as stated by the source).
  • The New Holland T 6050 Plus has 21% more lift (1,364 kg / 3,007 lb) than the Landini 130 DT (both lift at the hitch ends, as stated by the source).
  • The Landini 130 DT is 13% heavier (680 kg / 1,499 lb) than the New Holland T 6050 Plus (both unladen weight, as stated by the source).
  • The Landini 130 DT has 50% more forward gears (12 gears) than the New Holland T 6050 Plus (both forward gears, as stated by the source).
  • The New Holland T 6050 Plus is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 130 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 6050 Plus has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.

← Every figure for both machines, side by side, with sources