13 material differences
Tractor oneLandini R-9880 (DT) TL-45 N/A (TL-45 DT/A)1987–2000No measured PTO figureTractor twoWHITE 1001987–1990No measured PTO figure
Which should you choose?
Read our verdict on the R-9880 (DT) TL-45 N/A (TL-45 DT/A) and the 100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | R-9880 (DT) TL-45 N/A (TL-45 DT/A) | 100 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 91.7 hp | 92.0 hp | — |
| Engine declared | Perkins TL 4.236 | CUMMINS B 6-590 | differs |
| Displacement declared | 3.86 L | 5.89 L | +52% 100 |
| Maximum torque declared | 255 lb·ft · 346 N·m | 261 lb·ft · 354 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | — | Pedal-operated dry single-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 11.5 gpm · 43.7 L/min | 19.0 gpm · 71.9 L/min | +65% 100 |
| Three-point lift, at the coupling points declared | 7,893 lb · 3,580 kg | 7,189 lb · 3,261 kg | +10% R-9880 (DT) TL-45 N/A (TL-45 DT/A) |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,893 lb · 3,580 kg | 12,000 lb · 5,443 kg | +52% 100 |
| Wheelbase declared | 97.0 in · 2,463 mm | 111.5 in · 2,832 mm | +15% 100 |
| Length declared | 155.5 in · 3,950 mm | 173.2 in · 4,400 mm | +11% 100 |
| Width declared | 80.3 in · 2,040 mm | 96.0 in · 2,438 mm | +20% 100 |
| Ground clearance declared | 18.1 in · 460 mm | 26.3 in · 667 mm | +45% 100 |
| Turning radius, braked declared | 12.8 ft · 3.89 m | 11.4 ft · 3.48 m | +12% R-9880 (DT) TL-45 N/A (TL-45 DT/A) |
| Fuel tank declared | 107.8 qt · 102.0 L | 100.4–132.1 qt · 95.0–125.0 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini R-9880 (DT) TL-45 N/A (TL-45 DT/A) sources
- Source: Traktorenlexikon, “Landini 9880”
WHITE 100 sources
- Source: Traktorenlexikon, “White 100”