Landini R-9880 (DT) TL-45 N/A (TL-45 DT/A) or Renault 103-14 TX?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the R-9880 (DT) TL-45 N/A (TL-45 DT/A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 103-14 TX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Renault 103-14 TX suits loader and hydraulic implement work better on this data: 15% (520 kg / 1,146 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | R-9880 (DT) TL-45 N/A (TL-45 DT/A) | 103-14 TX | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 68.4 kW (91.7 hp)Traktorenlexikon, “Landini 9880” | 68.4 kW (91.7 hp)Traktorenlexikon, “Renault 103-14 TS/TX R7822” | Not comparableNot comparable on power at the PTO shaft: the R-9880 (DT) TL-45 N/A (TL-45 DT/A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 103-14 TX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the R-9880 (DT) TL-45 N/A (TL-45 DT/A) and the 103-14 TX. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the R-9880 (DT) TL-45 N/A (TL-45 DT/A) and the 103-14 TX. |
| Which pumps more oil for implements? | 43.7 L/min (11.5 gpm)Traktorenlexikon, “Landini 9880” | 40.2 L/min (10.6 gpm)Traktorenlexikon, “Renault 103-14 TS/TX R7822” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | 3,580 kg (7,893 lb)Traktorenlexikon, “Landini 9880” | 4,100 kg (9,039 lb)Traktorenlexikon, “Renault 103-14 TS/TX R7822” | AheadThe Renault 103-14 TX has 15% more lift (520 kg / 1,146 lb) than the Landini R-9880 (DT) TL-45 N/A (TL-45 DT/A) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 3,580 kg (7,893 lb)Traktorenlexikon, “Landini 9880” | 4,920 kg (10,847 lb)Traktorenlexikon, “Renault 103-14 TS/TX R7822” | Ahead (a fact, not an advantage)The Renault 103-14 TX is 37% heavier (1,340 kg / 2,954 lb) than the Landini R-9880 (DT) TL-45 N/A (TL-45 DT/A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the R-9880 (DT) TL-45 N/A (TL-45 DT/A) and the 103-14 TX. |
| Which has the wider choice of gears? | 12 to 24Traktorenlexikon, “Landini 9880” | 12Traktorenlexikon, “Renault 103-14 TS/TX R7822” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the R-9880 (DT) TL-45 N/A (TL-45 DT/A) and the 103-14 TX. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Landini 9880” | 25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Renault 103-14 TS/TX R7822” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/540E/1000 rpmTraktorenlexikon, “Landini 9880” | 540/1000 rpmTraktorenlexikon, “Renault 103-14 TS/TX R7822” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the R-9880 (DT) TL-45 N/A (TL-45 DT/A) and the 103-14 TX. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Landini 9880” | 4WDTraktorenlexikon, “Renault 103-14 TS/TX R7822” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1987–2000 | 1981–1986 | Ahead (a fact, not an advantage)The Landini R-9880 (DT) TL-45 N/A (TL-45 DT/A) is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Renault 103-14 TX has 15% more lift (520 kg / 1,146 lb) than the Landini R-9880 (DT) TL-45 N/A (TL-45 DT/A) (both lift at the hitch ends, as stated by the source).
- The Renault 103-14 TX is 37% heavier (1,340 kg / 2,954 lb) than the Landini R-9880 (DT) TL-45 N/A (TL-45 DT/A) (both unladen weight, as stated by the source).
- The Landini R-9880 (DT) TL-45 N/A (TL-45 DT/A) is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the R-9880 (DT) TL-45 N/A (TL-45 DT/A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 103-14 TX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources