Landini 9800 (DT) or Renault 103-54 TX?
Which should you choose?
The figures split: the Landini 9800 (DT) is ahead on hydraulic flow and forward gears; the Renault 103-54 TX is ahead on three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 9800 (DT) | 103-54 TX | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 58.0 kW (77.8 hp)Traktorenlexikon, “Landini 9800 DT” | 58.4 kW (78.3 hp)Traktorenlexikon, “Renault 103-54 TE/TA/TS/TX/TM R7822” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 9800 (DT) and the 103-54 TX. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 9800 (DT) and the 103-54 TX. |
| Which pumps more oil for implements? | 51.1 L/min (13.5 gpm)Traktorenlexikon, “Landini 9800 DT” | 42.0 L/min (11.1 gpm)Traktorenlexikon, “Renault 103-54 TE/TA/TS/TX/TM R7822” | AheadThe Landini 9800 (DT) has 22% more hydraulic flow (9.1 L/min / 2.4 gpm) than the Renault 103-54 TX (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 4,670 kg (10,296 lb)Traktorenlexikon, “Landini 9800 DT” | 6,200 kg (13,669 lb)Traktorenlexikon, “Renault 103-54 TE/TA/TS/TX/TM R7822” | AheadThe Renault 103-54 TX has 33% more lift (1,530 kg / 3,373 lb) than the Landini 9800 (DT) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 4,080 kg (8,995 lb)Traktorenlexikon, “Landini 9800 DT” | 4,690 kg (10,340 lb)Traktorenlexikon, “Renault 103-54 TE/TA/TS/TX/TM R7822” | Ahead (a fact, not an advantage)The Renault 103-54 TX is 15% heavier (610 kg / 1,345 lb) than the Landini 9800 (DT) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 6,800 kg (14,991 lb)Traktorenlexikon, “Landini 9800 DT” | 7,095 kg (15,642 lb)Traktorenlexikon, “Renault 103-54 TE/TA/TS/TX/TM R7822” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | 32Traktorenlexikon, “Landini 9800 DT” | 16Traktorenlexikon, “Renault 103-54 TE/TA/TS/TX/TM R7822” | AheadThe Landini 9800 (DT) has 100% more forward gears (16 gears) than the Renault 103-54 TX (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 9800 (DT) and the 103-54 TX. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Landini 9800 DT” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Renault 103-54 TE/TA/TS/TX/TM R7822” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Landini 9800 DT” | 540/1000 rpmTraktorenlexikon, “Renault 103-54 TE/TA/TS/TX/TM R7822” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Landini 9800 DT” | — | No figureNo call on PTO independence: not stated for the 103-54 TX. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Landini 9800 DT” | 4WDTraktorenlexikon, “Renault 103-54 TE/TA/TS/TX/TM R7822” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1987–2000 | 1989–1990 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Landini 9800 (DT) has 22% more hydraulic flow (9.1 L/min / 2.4 gpm) than the Renault 103-54 TX (both pump flow, as stated by the source).
- The Renault 103-54 TX has 33% more lift (1,530 kg / 3,373 lb) than the Landini 9800 (DT) (both lift at the hitch ends, as stated by the source).
- The Renault 103-54 TX is 15% heavier (610 kg / 1,345 lb) than the Landini 9800 (DT) (both unladen weight, as stated by the source).
- The Landini 9800 (DT) has 100% more forward gears (16 gears) than the Renault 103-54 TX (both forward gears, as stated by the source).
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources