9 material differences · fewer than 12
Tractor oneLandini R-9500 (DT) "TL 19 N/B"1973–1983No measured PTO figureTractor twoVALMET 11001969–1974No measured PTO figure
Which should you choose?
Read our verdict on the R-9500 (DT) "TL 19 N/B" and the 1100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | R-9500 (DT) "TL 19 N/B" | 1100 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 103.5 hp | 103.5 hp | — |
| Engine declared | Perkins A 6.354 | VALMET 411 AS | differs |
| Displacement declared | 5.80 L | 4.18 L | +39% R-9500 (DT) "TL 19 N/B" |
| Maximum torque declared | 182 lb·ft · 247 N·m | 258 lb·ft · 350 N·m | +42% 1100 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Dry VALEO double clutch | Dry Fichtel & Sachs double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 9.2 gpm · 35.0 L/min | 11.9 gpm · 45.2 L/min | +29% 1100 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,738 lb · 3,510 kg | 8,190 lb · 3,715 kg | +6% 1100 |
| Wheelbase declared | 95.3 in · 2,420 mm | 90.9 in · 2,310 mm | — |
| Length declared | 160.6 in · 4,080 mm | 149.6 in · 3,800 mm | +7% R-9500 (DT) "TL 19 N/B" |
| Width declared | 81.5–93.3 in · 2,070–2,370 mm | 82.3–102.4 in · 2,090–2,600 mm | differs |
| Ground clearance declared | 19.3 in · 490 mm | 18.5 in · 470 mm | — |
| Turning radius, braked declared | 13.3 ft · 4.06 m | 12.5 ft · 3.81 m | +7% R-9500 (DT) "TL 19 N/B" |
| Fuel tank declared | 97.2 qt · 92.0 L | 100.4 qt · 95.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini R-9500 (DT) "TL 19 N/B" sources
- Source: Traktorenlexikon, “Landini 9500”
- Source: Traktorenlexikon, “Massey Ferguson MF 699”
VALMET 1100 sources
- Source: Traktorenlexikon, “Valmet 1100”