6 material differences · fewer than 12
Tractor oneLandini R-9500 (DT) "TL 19 N/B"1973–1983No measured PTO figureTractor twoSteyr 1108 (a)1977–1979No measured PTO figure
Which should you choose?
Read our verdict on the R-9500 (DT) "TL 19 N/B" and the 1108 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 9 fields identical or within 5%, which is not counted as material
| Field | R-9500 (DT) "TL 19 N/B" | 1108 (a) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 103.5 hp | 103.7 hp | — |
| Engine declared | Perkins A 6.354 | Steyr WD-610.44 | differs |
| Displacement declared | 5.80 L | 5.98 L | — |
| Maximum torque declared | 182 lb·ft · 247 N·m | 268 lb·ft · 363 N·m | +47% 1108 (a) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Dry VALEO double clutch | Dry Fichtel & Sachs single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 9.2 gpm · 35.0 L/min | 9.4 gpm · 35.5 L/min | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,738 lb · 3,510 kg | 8,477 lb · 3,845 kg | +10% 1108 (a) |
| Wheelbase declared | 95.3 in · 2,420 mm | 99.8 in · 2,534 mm | — |
| Length declared | 160.6 in · 4,080 mm | 165.0 in · 4,190 mm | — |
| Width declared | 81.5–93.3 in · 2,070–2,370 mm | 82.5 in · 2,096 mm | differs |
| Ground clearance declared | 19.3 in · 490 mm | 19.5 in · 495 mm | — |
| Turning radius, braked declared | 13.3 ft · 4.06 m | 13.1 ft · 4.00 m | — |
| Fuel tank declared | 97.2 qt · 92.0 L | 124.7 qt · 118.0 L | +28% 1108 (a) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini R-9500 (DT) "TL 19 N/B" sources
- Source: Traktorenlexikon, “Landini 9500”
- Source: Traktorenlexikon, “Massey Ferguson MF 699”
Steyr 1108 (a) sources
- Source: Traktorenlexikon, “Steyr 1108”