Landini R-8880 (DT) or Renault 80-14 F?
Which should you choose?
On performance, every comparable figure that differs favours the Renault 80-14 F: hydraulic flow. On features, the Landini R-8880 (DT) is ahead on PTO speeds.
- The Landini R-8880 (DT) suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
- The Renault 80-14 F suits loader and hydraulic implement work better on this data: 18% (6.5 L/min / 1.7 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | R-8880 (DT) | 80-14 F | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 49.8 kW (66.8 hp)Traktorenlexikon, “Landini 8880” | 49.7 kW (66.6 hp)Traktorenlexikon, “Renault 80-14 F R3278” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the R-8880 (DT) and the 80-14 F. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the R-8880 (DT) and the 80-14 F. |
| Which pumps more oil for implements? | 36.7 L/min (9.7 gpm)Traktorenlexikon, “Landini 8880” | 43.2 L/min (11.4 gpm)Traktorenlexikon, “Renault 80-14 F R3278” | AheadThe Renault 80-14 F has 18% more hydraulic flow (6.5 L/min / 1.7 gpm) than the Landini R-8880 (DT) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 3,700 kg (8,157 lb)Traktorenlexikon, “Landini 8880” | 3,510 kg (7,738 lb)Traktorenlexikon, “Renault 80-14 F R3278” | EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which is heavier, for traction? | 3,520 kg (7,760 lb)Traktorenlexikon, “Landini 8880” | 2,130 kg (4,696 lb)Traktorenlexikon, “Renault 80-14 F R3278” | Ahead (a fact, not an advantage)The Landini R-8880 (DT) is 65% heavier (1,390 kg / 3,064 lb) than the Renault 80-14 F (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the R-8880 (DT) and the 80-14 F. |
| Which has the wider choice of gears? | 12 to 24Traktorenlexikon, “Landini 8880” | 8 to 12Traktorenlexikon, “Renault 80-14 F R3278” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the R-8880 (DT) and the 80-14 F. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Landini 8880” | 30 km/h (18.6 mph)Traktorenlexikon, “Renault 80-14 F R3278” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/540E/1000 rpmTraktorenlexikon, “Landini 8880” | 540 rpmTraktorenlexikon, “Renault 80-14 F R3278” | AheadThe Landini R-8880 (DT) offers 1000 rpm at the PTO, which the Renault 80-14 F does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Landini 8880” | — | No figureNo call on PTO independence: not stated for the 80-14 F. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Landini 8880” | 4WDTraktorenlexikon, “Renault 80-14 F R3278” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1987–2000 | 1986–1999 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Renault 80-14 F has 18% more hydraulic flow (6.5 L/min / 1.7 gpm) than the Landini R-8880 (DT) (both pump flow, as stated by the source).
- The Landini R-8880 (DT) is 65% heavier (1,390 kg / 3,064 lb) than the Renault 80-14 F (both unladen weight, as stated by the source).
- The Landini R-8880 (DT) offers 1000 rpm at the PTO, which the Renault 80-14 F does not (as stated by the sources).
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources