10 material differences · fewer than 12
Tractor oneLandini 8800 (DT)1987–2000No measured PTO figureTractor twoSAME Saturno 80 (DT)1972–1980No measured PTO figure
Which should you choose?
Read our verdict on the 8800 (DT) and the Saturno 80 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 8800 (DT) | Saturno 80 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 75.9 hp | 75.9 hp | — |
| Engine declared | PERKINS LF 4.248 | SAME DA 039-1054 L or 1054 P | differs |
| Displacement declared | 4.07 L | 4.15 L | — |
| Maximum torque declared | 185 lb·ft · 251 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | Pedal-operated dry single-disc clutch | Pedal-operated dry two-stage SAME double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 13.6 gpm · 51.5 L/min | — | — |
| Three-point lift, at the coupling points declared | 7,397 lb · 3,355 kg | 4,806 lb · 2,180 kg | +54% 8800 (DT) |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,422 lb · 3,820 kg | 6,085 lb · 2,760 kg | +38% 8800 (DT) |
| Wheelbase declared | 93.3 in · 2,371 mm | 92.5 in · 2,350 mm | — |
| Length declared | 155.9 in · 3,959 mm | 143.7 in · 3,650 mm | +8% 8800 (DT) |
| Width declared | 78.3 in · 1,990 mm | 76.0–95.7 in · 1,930–2,430 mm | differs |
| Ground clearance declared | 14.1 in · 357 mm | 19.7 in · 500 mm | +40% Saturno 80 (DT) |
| Turning radius, braked declared | — | 11.5 ft · 3.50 m | — |
| Fuel tank declared | 156.4 qt · 148.0 L | 84.5 qt · 80.0 L | +85% 8800 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini 8800 (DT) sources
- Source: Traktorenlexikon, “Landini 8800 DT”
SAME Saturno 80 (DT) sources
- Source: Traktorenlexikon, “SAME Saturno 80 Synchro”