10 material differences · fewer than 12
Tractor oneLandini R 8000 Super-Special (TL-9 N/B)1967–1974No measured PTO figureTractor twoSOMECA 800 (TD)1968–1971No measured PTO figure
Which should you choose?
Read our verdict on the R 8000 Super-Special (TL-9 N/B) and the 800 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | R 8000 Super-Special (TL-9 N/B) | 800 (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 75.0 hp | 75.0 hp | — |
| Engine declared | Perkins A 4.248 | O.M.-FIAT CO 3/80 | differs |
| Displacement declared | 4.07 L | 4.94 L | +22% 800 (TD) |
| Maximum torque declared | 189 lb·ft · 256 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% R 8000 Super-Special (TL-9 N/B) |
| Clutch declared | Dry Landini double clutch | pedal-operated dry FEREDO double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 9.9 gpm · 37.5 L/min | — |
| Pressure declared | — | 2,611 psi · 180 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,997 lb · 2,720 kg | 6,614 lb · 3,000 kg | +10% 800 (TD) |
| Wheelbase declared | 85.4 in · 2,170 mm | 93.7 in · 2,380 mm | +10% 800 (TD) |
| Length declared | 144.9 in · 3,680 mm | 159.4 in · 4,050 mm | +10% 800 (TD) |
| Width declared | 74.8–94.5 in · 1,900–2,400 mm | 76.2–99.8 in · 1,935–2,535 mm | differs |
| Ground clearance declared | 17.3 in · 440 mm | 13.6 in · 346 mm | +27% R 8000 Super-Special (TL-9 N/B) |
| Turning radius, braked declared | 11.9 ft · 3.63 m | 12.1 ft · 3.70 m | — |
| Fuel tank declared | 90.9 qt · 86.0 L | 85.6 qt · 81.0 L | +6% R 8000 Super-Special (TL-9 N/B) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini R 8000 Super-Special (TL-9 N/B) sources
- Source: Traktorenlexikon, “Landini 8000 Super-Special”
- Source: Traktorenlexikon, “Massey Ferguson MF 178”
SOMECA 800 (TD) sources
- Source: Traktorenlexikon, “Someca 800”