9 material differences · fewer than 12
Tractor oneLandini R-7880 (DT)1987–2000No measured PTO figureTractor twoWHITE 64101998–2001No measured PTO figure
Which should you choose?
Read our verdict on the R-7880 (DT) and the 6410 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | R-7880 (DT) | 6410 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 70.0 hp | 70.0 hp | — |
| Engine declared | Perkins LD 4.236 | CUMMINS B 3.9 T | differs |
| Displacement declared | 3.87 L | 3.93 L | — |
| Maximum torque declared | 184 lb·ft · 249 N·m | 235 lb·ft · 319 N·m | +28% 6410 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Dry and air-cooled double clutch | Pedal operated dry single disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 9.7 gpm · 36.7 L/min | 10.6 gpm · 40.1 L/min | +9% 6410 |
| Pressure declared | — | 3,046 psi · 210 bar | — |
| Three-point lift, at the coupling points declared | 6,834 lb · 3,100 kg | 3,351 lb · 1,520 kg | +104% R-7880 (DT) |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,363 lb · 3,340 kg | 7,868 lb · 3,569 kg | +7% 6410 |
| Wheelbase declared | 96.1 in · 2,440 mm | 96.0 in · 2,438 mm | — |
| Length declared | 155.5 in · 3,950 mm | 161.0 in · 4,089 mm | — |
| Width declared | 80.3 in · 2,040 mm | 78.0 in · 1,981 mm | — |
| Ground clearance declared | 18.1 in · 460 mm | — | — |
| Turning radius, braked declared | 12.8 ft · 3.89 m | — | — |
| Fuel tank declared | 107.8 qt · 102.0 L | 147.9 qt · 140.0 L | +37% 6410 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini R-7880 (DT) sources
- Source: Traktorenlexikon, “Landini 7880”
- Source: Traktorenlexikon, “Massey Ferguson MF 373”
WHITE 6410 sources
- Source: Traktorenlexikon, “AGCO-White 6410”
- Source: Traktorenlexikon, “White 6410”