Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) or Massey Ferguson MF 387 A?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the R-7860 (DT) TL-20 N/M (TL-20 DT/M) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 387 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Massey Ferguson 387A suits loader and hydraulic implement work better on this data: 13% (269 kg / 593 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | R-7860 (DT) TL-20 N/M (TL-20 DT/M) | MF 387 A | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 52.2 kW (70.0 hp)Traktorenlexikon, “Landini 7860” | 52.3 kW (70.1 hp)Traktorenlexikon, “Massey Ferguson MF 387” | Not comparableNot comparable on power at the PTO shaft: the R-7860 (DT) TL-20 N/M (TL-20 DT/M) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 387 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the R-7860 (DT) TL-20 N/M (TL-20 DT/M) and the MF 387 A. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the R-7860 (DT) TL-20 N/M (TL-20 DT/M) and the MF 387 A. |
| Which pumps more oil for implements? | 37.2 L/min (9.8 gpm)Traktorenlexikon, “Landini 7860” | — | No figureNo call on hydraulic flow: no figure on record for the MF 387 A. |
| Which lifts more on the three-point hitch? | 2,131 kg (4,698 lb)Traktorenlexikon, “Landini 7860” | 2,400 kg (5,291 lb)Traktorenlexikon, “Massey Ferguson MF 387” | AheadThe Massey Ferguson 387A has 13% more lift (269 kg / 593 lb) than the Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 2,860 kg (6,305 lb)Traktorenlexikon, “Landini 7860” | 3,540 kg (7,804 lb)Traktorenlexikon, “Massey Ferguson MF 387” | Ahead (a fact, not an advantage)The Massey Ferguson 387A is 24% heavier (680 kg / 1,499 lb) than the Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the R-7860 (DT) TL-20 N/M (TL-20 DT/M) and the MF 387 A. |
| Which has the wider choice of gears? | 12 to 24Traktorenlexikon, “Landini 7860” | 24Traktorenlexikon, “Massey Ferguson MF 387” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the R-7860 (DT) TL-20 N/M (TL-20 DT/M) and the MF 387 A. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Landini 7860” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 387” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Landini 7860” | 540 rpm / 1000 rpmTraktorenlexikon, “Massey Ferguson MF 387” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Landini 7860” | independentTraktorenlexikon, “Massey Ferguson MF 387” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Landini 7860” | 4WDTraktorenlexikon, “Massey Ferguson MF 387” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1988–2000 | 1987–1994 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Massey Ferguson 387A has 13% more lift (269 kg / 593 lb) than the Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) (both lift at the hitch ends, as stated by the source).
- The Massey Ferguson 387A is 24% heavier (680 kg / 1,499 lb) than the Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) (both unladen weight, as stated by the source).
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the R-7860 (DT) TL-20 N/M (TL-20 DT/M) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 387 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources