8 material differences · fewer than 12

Tractor oneLandini 7800 (DT)1987–2000No measured PTO figureTractor twoMassey Ferguson MF 375 (A)1987–1997No measured PTO figure

Which should you choose?

Read our verdict on the 7800 (DT) and the MF 375 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Landini 7800 (DT) and Massey Ferguson MF 375 (A), field by field
Field	7800 (DT)	MF 375 (A)	Gap
Engine
Engine power, claimed claimed	67 hp	67.1 hp	—
Engine declared	Perkins LD 4.236	Perkins A 4.236	differs
Displacement declared	3.87 L	3.87 L	—
Maximum torque declared	182 lb·ft · 247 N·m	173 lb·ft · 234 N·m	+6% 7800 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	pedal-operated dry single-plate clutch	—	—
Hydraulics & hitch
Pump flow declared	12.9 gpm · 49.0 L/min	16.7 gpm · 63.3 L/min	+29% MF 375 (A)
Pressure declared	2,901 psi · 200 bar	2,466 psi · 170 bar	+18% 7800 (DT)
Three-point lift, at the coupling points declared	7,848 lb · 3,560 kg	6,746 lb · 3,060 kg	+16% 7800 (DT)
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,168 lb · 3,705 kg	6,945 lb · 3,150 kg	+18% 7800 (DT)
Maximum permissible mass declared	—	13,669 lb · 6,200 kg	—
Wheelbase declared	93.3 in · 2,371 mm	89.8 in · 2,280 mm	—
Length declared	155.5 in · 3,950 mm	153.1 in · 3,888 mm	—
Width declared	78.3 in · 1,990 mm	78.0 in · 1,980 mm	—
Height, over the cab declared	103.1 in · 2,620 mm	104.1 in · 2,645 mm	—
Ground clearance declared	—	12.2 in · 311 mm	—
Fuel tank declared	156.4 qt · 148.0 L	114.1 qt · 108 L	+37% 7800 (DT)

Source

Source