Landini 7800-Turbo (DT) or Steyr 8090 (a)?

Which should you choose?

The figures split: the Landini 7800-Turbo (DT) is ahead on hydraulic flow; the Steyr 8090 (a) is ahead on three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Landini 7800-Turbo (DT) and Steyr 8090 (a), with the call on each
Question7800-Turbo (DT)8090 (a)Call
Which puts more power through the PTO shaft?55.3 kW (74.2 hp)Traktorenlexikon, “Landini 7800 DT Turbo”55.7 kW (74.7 hp)Traktorenlexikon, “Steyr 8090”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 7800-Turbo (DT) and the 8090 (a).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 7800-Turbo (DT) and the 8090 (a).
Which pumps more oil for implements?51.0 L/min (13.5 gpm)Traktorenlexikon, “Landini 7800 DT Turbo”39.0 L/min (10.3 gpm)Traktorenlexikon, “Steyr 8090”AheadThe Landini 7800-Turbo (DT) has 31% more hydraulic flow (12.0 L/min / 3.2 gpm) than the Steyr 8090 (a) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?3,540 kg (7,804 lb)Traktorenlexikon, “Landini 7800 DT Turbo”4,500 kg (9,921 lb)Traktorenlexikon, “Steyr 8090”AheadThe Steyr 8090 (a) has 27% more lift (960 kg / 2,116 lb) than the Landini 7800-Turbo (DT) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,815 kg (8,411 lb)Traktorenlexikon, “Landini 7800 DT Turbo”3,150 kg (6,945 lb)Traktorenlexikon, “Steyr 8090”Ahead (a fact, not an advantage)The Landini 7800-Turbo (DT) is 21% heavier (665 kg / 1,466 lb) than the Steyr 8090 (a) (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 7800-Turbo (DT) and the 8090 (a).
Which has the wider choice of gears?32Traktorenlexikon, “Landini 7800 DT Turbo”16 to 32Traktorenlexikon, “Steyr 8090”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 7800-Turbo (DT) and the 8090 (a).
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Landini 7800 DT Turbo”25 km/h (15.5 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Steyr 8090”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Landini 7800 DT Turbo”540/1000 rpmTraktorenlexikon, “Steyr 8090”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Landini 7800 DT Turbo”No figureNo call on PTO independence: not stated for the 8090 (a).
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Landini 7800 DT Turbo”2WD / 4WDTraktorenlexikon, “Steyr 8090”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1987–20001983–1992EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Landini 7800-Turbo (DT) has 31% more hydraulic flow (12.0 L/min / 3.2 gpm) than the Steyr 8090 (a) (both pump flow, as stated by the source).
  • The Steyr 8090 (a) has 27% more lift (960 kg / 2,116 lb) than the Landini 7800-Turbo (DT) (both lift at the hitch ends, as stated by the source).
  • The Landini 7800-Turbo (DT) is 21% heavier (665 kg / 1,466 lb) than the Steyr 8090 (a) (both unladen weight, as stated by the source).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources