Landini 7800-Turbo (DT) or New Holland TD 85 D (A)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 7800-Turbo (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TD 85 D (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Landini 7800-Turbo (DT) suits loader and hydraulic implement work better on this data: 13% (5.8 L/min / 1.5 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Landini 7800-Turbo (DT) and New Holland TD 85 D (A), with the call on each
Question7800-Turbo (DT)TD 85 D (A)Call
Which puts more power through the PTO shaft?61.8 kW (82.9 hp)Traktorenlexikon, “Landini 7800 DT Turbo”61.8 kW (82.9 hp)Traktorenlexikon, “New Holland TD 85 D”Not comparableNot comparable on power at the PTO shaft: the 7800-Turbo (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TD 85 D (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 7800-Turbo (DT) and the TD 85 D (A).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 7800-Turbo (DT) and the TD 85 D (A).
Which pumps more oil for implements?51.0 L/min (13.5 gpm)Traktorenlexikon, “Landini 7800 DT Turbo”45.2 L/min (11.9 gpm)Traktorenlexikon, “New Holland TD 85 D”AheadThe Landini 7800-Turbo (DT) has 13% more hydraulic flow (5.8 L/min / 1.5 gpm) than the New Holland TD 85 D (A) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?3,540 kg (7,804 lb)Traktorenlexikon, “Landini 7800 DT Turbo”3,565 kg (7,859 lb)Traktorenlexikon, “New Holland TD 85 D”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?3,815 kg (8,411 lb)Traktorenlexikon, “Landini 7800 DT Turbo”3,165 kg (6,978 lb)Traktorenlexikon, “New Holland TD 85 D”Ahead (a fact, not an advantage)The Landini 7800-Turbo (DT) is 21% heavier (650 kg / 1,433 lb) than the New Holland TD 85 D (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 7800-Turbo (DT) and the TD 85 D (A).
Which has the wider choice of gears?32Traktorenlexikon, “Landini 7800 DT Turbo”12 to 20Traktorenlexikon, “New Holland TD 85 D”AheadThe Landini 7800-Turbo (DT) has 60% more forward gears (12 gears) than the New Holland TD 85 D (A) (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 7800-Turbo (DT) and the TD 85 D (A).
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Landini 7800 DT Turbo”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “New Holland TD 85 D”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Landini 7800 DT Turbo”540 rpm / 1000 rpmTraktorenlexikon, “New Holland TD 85 D”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Landini 7800 DT Turbo”independentTraktorenlexikon, “New Holland TD 85 D”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Landini 7800 DT Turbo”Two-wheel or four-wheel driveTraktorenlexikon, “New Holland TD 85 D”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1987–20002002–2004Ahead (a fact, not an advantage)The New Holland TD 85 D (A) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Landini 7800-Turbo (DT) has 13% more hydraulic flow (5.8 L/min / 1.5 gpm) than the New Holland TD 85 D (A) (both pump flow, as stated by the source).
  • The Landini 7800-Turbo (DT) is 21% heavier (650 kg / 1,433 lb) than the New Holland TD 85 D (A) (both unladen weight, as stated by the source).
  • The Landini 7800-Turbo (DT) has 60% more forward gears (12 gears) than the New Holland TD 85 D (A) (both forward gears, as stated by the source).
  • The New Holland TD 85 D (A) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 7800-Turbo (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TD 85 D (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources