Landini R-7500 (DT) vs Massey Ferguson MF 284 S (A)

7 material differences · fewer than 12

Tractor one

1978–1987

No measured PTO figure

Tractor two

1983–1989

No measured PTO figure

Which should you choose?

Read our verdict on the R-7500 (DT) and the MF 284 S (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 8 fields identical or within 5%, which is not counted as material

Landini R-7500 (DT) and Massey Ferguson MF 284 S (A), field by field
Field	R-7500 (DT)	MF 284 S (A)	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	Perkins LD.22756 (A 4.236)	Perkins A 4.236	differs
Displacement declared	3.87 L	3.87 L	—
Maximum torque declared	198 lb·ft · 268 N·m	194 lb·ft · 263 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% R-7500 (DT)
Clutch declared	Dry LUK double clutch, pedal-operated driving clutch and hand lever-operated PTO clutch	Pedal-operated, dry and air-cooled double clutch	differs
Hydraulics & hitch
Pump flow declared	—	8.9 gpm · 33.6 L/min	—
Three-point lift at ends declared	5,260 lb · 2,386 kg	3,372 lb · 1,530 kg	+56% R-7500 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,896 lb · 3,128 kg	7,143 lb · 3,240 kg	—
Wheelbase declared	96.9 in · 2,460 mm	97.6 in · 2,480 mm	—
Length declared	150.8 in · 3,830 mm	155.5 in · 3,950 mm	—
Width declared	77.6 in · 1,970 mm	79.0 in · 2,007 mm	—
Height declared	107.9 in · 2,740 mm	97.2 in · 2,470 mm	+11% R-7500 (DT)
Ground clearance declared	17.7 in · 450 mm	15.7 in · 400 mm	+13% R-7500 (DT)
Turning radius, braked declared	11.2 ft · 3.42 m	—	—
Fuel tank declared	64.5 qt · 61.0 L	126.8 qt · 120 L	+97% MF 284 S (A)

Source

Source