7 material differences · fewer than 12

Tractor oneLandini R-6860 (DT) TL-21 N/K (TL-21 DT/K)1988–2000No measured PTO figureTractor twoRenault 70-32 PX1989–1992No measured PTO figure

Which should you choose?

Read our verdict on the R-6860 (DT) TL-21 N/K (TL-21 DT/K) and the 70-32 PX → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

7 material differences · 9 fields identical or within 5%, which is not counted as material

Landini R-6860 (DT) TL-21 N/K (TL-21 DT/K) and Renault 70-32 PX, field by field
FieldR-6860 (DT) TL-21 N/K (TL-21 DT/K)70-32 PXGap
Engine
Engine power, claimed claimed64.1 hp64.1 hp—
Engine declaredPerkins LD 4.236Perkins LD 4.236—
Displacement declared3.87 L3.87 L—
Maximum torque declared181 lb·ft · 246 N·m180 lb·ft · 244 N·m—
Transmission
Top speed declared18.6 mph · 30 km/h18.6–24.9 mph · 30–40 km/hdiffers
Clutch declaredDry, air-cooled LuK double clutchDry Valeo double clutchdiffers
Hydraulics & hitch
Pump flow declared10.1 gpm · 38.4 L/min8.5 gpm · 32.1 L/min+20% R-6860 (DT) TL-21 N/K (TL-21 DT/K)
Pressure declared2,756 psi · 190 bar——
Three-point lift, at the coupling points declared4,116 lb · 1,867 kg6,327 lb · 2,870 kg+54% 70-32 PX
Rear PTO speeds declared540/1000 rpm540/1000 rpm—
Weight & dimensions
Unladen weight declared5,490 lb · 2,490 kg6,393 lb · 2,900 kg+16% 70-32 PX
Wheelbase declared88.5 in · 2,249 mm92.1 in · 2,340 mm—
Length declared143.7 in · 3,650 mm146.1 in · 3,710 mm—
Width declared75.4 in · 1,915 mm73.2–92.3 in · 1,860–2,345 mmdiffers
Ground clearance declared19.1 in · 485 mm19.3 in · 490 mm—
Turning radius, braked declared12.6 ft · 3.83 m12.8 ft · 3.90 m—
Fuel tank declared90.9 qt · 86.0 L121.5 qt · 115.0 L+34% 70-32 PX

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Landini R-6860 (DT) TL-21 N/K (TL-21 DT/K) sources

Source
  • Source: Traktorenlexikon, “Landini 6860”
  • Source: Traktorenlexikon, “Massey Ferguson MF 373”

Renault 70-32 PX sources

Source
  • Source: Traktorenlexikon, “Renault 70-32 PE/PA/PS/PX R3131”
  • Source: Traktorenlexikon, “Massey Ferguson MF 373”