9 material differences · fewer than 12
Tractor oneLandini 6030 (DT) TL-39 N/B (TL-39 DT/B)1983–1987No measured PTO figureTractor twoSteyr 8065 (a)1986–1992No measured PTO figure
Which should you choose?
Read our verdict on the 6030 (DT) TL-39 N/B (TL-39 DT/B) and the 8065 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 6030 (DT) TL-39 N/B (TL-39 DT/B) | 8065 (a) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 55.3 hp | 55.3 hp | — |
| Engine declared | Perkins AT 3.152-4 | Steyr WD-311.87 or WD-311.85 | differs |
| Displacement declared | 2.50 L | 2.59 L | — |
| Maximum torque declared | 131 lb·ft · 178 N·m | 147 lb·ft · 199 N·m | +12% 8065 (a) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–24.9 mph · 25–40 km/h | differs |
| Clutch declared | Dry and air-cooled OMG or LuK double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 9.6 gpm · 36.5 L/min | — | — |
| Pressure declared | 2,901 psi · 200 bar | 3,553 psi · 245 bar | +23% 8065 (a) |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,971 lb · 2,255 kg | 5,368 lb · 2,435 kg | +8% 8065 (a) |
| Wheelbase declared | 81.9 in · 2,080 mm | 78.7 in · 1,998 mm | — |
| Length declared | 138.2 in · 3,510 mm | 137.6 in · 3,495 mm | — |
| Width declared | 75.6 in · 1,920 mm | 67.8 in · 1,722 mm | +11% 6030 (DT) TL-39 N/B (TL-39 DT/B) |
| Ground clearance declared | 19.5 in · 495 mm | 16.9 in · 430 mm | +15% 6030 (DT) TL-39 N/B (TL-39 DT/B) |
| Turning radius, braked declared | 12.4 ft · 3.79 m | 10.3 ft · 3.14 m | +21% 6030 (DT) TL-39 N/B (TL-39 DT/B) |
| Fuel tank declared | 63.9 qt · 60.5 L | 63.4 qt · 60.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini 6030 (DT) TL-39 N/B (TL-39 DT/B) sources
- Source: Traktorenlexikon, “Landini 6030 (DT)”
- Source: Traktorenlexikon, “Massey Ferguson MF 253”
Steyr 8065 (a) sources
- Source: Traktorenlexikon, “Steyr 8065”